Jeep Grandee Cheroki
+ Jeep Grand Cherokee brand Cars
- Settings and routine maintenance
- Schedule of routine maintenance of Jeep Cherokee
Introduction
General information on settings
Checks of levels of liquids (each 400 km (250 miles) run or weekly)
Check of a condition of tires and pressure in them (each 400 km (250 miles) run or weekly)
Check of level of liquid of automatic transmission (each 400 km (250 miles) run or weekly)
Check of level of liquid of system of hydrostrengthening of a wheel (each 4800 km (3000 miles) run or times in 3 months)
Change of impellent oil and the oil filter (each 4800 km (3000 miles) run or times in 3 months)
Check and battery service (each 4800 km (3000 miles) run or times in 3 months)
Check of serviceability of system of cooling (each 4800 km (3000 miles) run or times in 3 months)
Check of a condition and replacement of hoses passing under a cowl (each 4800 km (3000 miles) run or times in 3 months)
Check of a condition and replacement of brushes of screen wipers (each 4800 km (3000 miles) run or times in 3 months)
Check of a condition of a suspension bracket and steering
Check of a condition of system of production of the fulfilled gases (each 12 000 km (7500 miles) run, or times in 6 months)
Check of level of transmission oil of a manual transmission (RKPP) (each 12 000 km (7500 miles) run, or times in 6 months)
Check of level of oil of a transfer case of all-wheel drive (4WD) of models (each 12 000 km (7500 miles) run, or times in 6 months)
Check of level of oil of differential (each 12 000 km (7500 miles) run, or times in 6 months)
Rotation of wheels (each 12 000 km (7500 miles) run, or times in 6 months)
Check of a condition of brake mechanisms (each 12 000 km (7500 miles) run, or times in 6 months)
Check of a condition of components of a power supply system (each 12 000 km (7500 miles) run, or times in 6 months)
Condition check, adjustment of a tension and replacement of a driving belt (each 12 000 km (7500 miles) run, or times in 6 months)
Check of a condition of seat belts (each 12 000 km (7500 miles) run, or times in 6 months)
Check of functioning of the sensor switch of permission of start (only models with AT) (each 12 000 km (7500 miles) run, or times in 6 months)
Chassis greasing (each 12 000 km (7500 miles) run, or times in 6 months)
Replacement of the air filter (each 48 000 km (30 000 miles) run, or times in two years)
Replacement of liquid and the filter of automatic transmission (each 48 000 km (30 000 miles) run, or times in two years)
Adjustment of tapes of automatic transmission (AT) (model since 1994 вып.) (each 48 000 km (30 000 miles) run, or times in two years)
Replacement of transmission oil of a manual box (switching) of transfers (RKPP) (each 48 000 km (30 000 miles) run, or times in two years)
Change of oil of a transfer case (4WD model) (each 48 000 km (30 000 miles) run, or times in two years)
Change of oil of differential (each 48 000 km (30 000 miles) run, or times in two years)
Service of system of cooling (an oporozhneniye, washing and filling) (each 48 000 km (30 000 miles) run, or times in two years)
Check of a condition and replacement of the valve of system of operated ventilation of a case (PCV) (V8) engines (each 48 000 km (30 000 miles) run, or times in two years)
Check, pro-cleaning and replacement of a hose of system of continuous ventilation of a case (CCV) (6 cylinder engines) (each 48 000 km (30 000 miles) run, or times in two years)
Check of serviceability of functioning of system of catching паров fuels (each 48 000 km (30 000 miles) run, or times in two years)
Cleaning of the filter of ventilation of a case (V8) engines (each 48 000 km (30 000 miles) run, or times in two years)
Replacement of the fuel filter (each 48 000 km (30 000 miles) run, or times in two years)
Replacement of spark plugs (each 48 000 km (30 000 miles) run, or times in two years)
Check of a condition of candle wires, covers and a distributor begunka (each 48 000 km (30 000 miles) run, or times in two years)
+ Ryadny six-cylinder engine
+ V8 Engine
+ Procedures of the general and major maintenance of the engine
+ Systems of cooling, heating and air conditioning
+ the Power supply system and production of the fulfilled gases
+ System of electric equipment of the engine
+ Systems of decrease in toxicity of the fulfilled gases and engine management
+ Manual box of gear shifting
+ Automatic transmission
+ Transfer case
+ Coupling and transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ System of onboard electric equipment
+ Governing bodies and operation receptions
|
Check of level of liquid of system of hydrostrengthening of a wheel (each 4800 km (3000 miles) run or times in 3 months)
Unlike a manual steering functioning of system of hydrostrengthening is directly connected with a condition and level of hydraulic liquid which is necessary for changing from time to time.
The tank of liquid of system of hydrostrengthening of a wheel is located on the case of the pump of system in a forward part of the engine.
|
|
- For carrying out check it is necessary to establish forward wheels of the car in rectilinear situation, and the engine to switch off.
- Previously wipe a cover of the tank and a surface round it pure rags. It will help to prevent hit in hydraulic system of dirt in the course of carrying out check.
- Having turned, uncover and to the touch define liquid temperature on the end of a core measuring щупа.
|
|
Shchup of measurement of level of liquid of system of hydrostrengthening of a wheel is built in in a cover of the tank of system - for removal turn a cover counter-clockwise.
|
- Wipe щуп pure rags, insert it into place, then again take and estimate on it liquid level. Level of liquid should be at demanded level, regardless of that, it is hot or cold (see an illustration below).
|
|
The core measuring щупа is equipped with the labels, allowing to estimate correctness of level both cold, and hot hydraulic liquid of the amplifier of a wheel.
|
- Having added liquids make directly in the tank, in order to avoid a razbryzgivaniye using a funnel.
- If for maintenance of demanded level it is required regular and frequent having added liquids, it is necessary to check carefully all hoses and shtutserny connections of a hydraulic contour of a steering drive on existence of signs of leaks.
|
|
|
|
