Jeep Grandee Cheroki
+ Jeep Grand Cherokee brand Cars
- Settings and routine maintenance
- Schedule of routine maintenance of Jeep Cherokee
Introduction
General information on settings
Checks of levels of liquids (each 400 km (250 miles) run or weekly)
Check of a condition of tires and pressure in them (each 400 km (250 miles) run or weekly)
Check of level of liquid of automatic transmission (each 400 km (250 miles) run or weekly)
Check of level of liquid of system of hydrostrengthening of a wheel (each 4800 km (3000 miles) run or times in 3 months)
Change of impellent oil and the oil filter (each 4800 km (3000 miles) run or times in 3 months)
Check and battery service (each 4800 km (3000 miles) run or times in 3 months)
Check of serviceability of system of cooling (each 4800 km (3000 miles) run or times in 3 months)
Check of a condition and replacement of hoses passing under a cowl (each 4800 km (3000 miles) run or times in 3 months)
Check of a condition and replacement of brushes of screen wipers (each 4800 km (3000 miles) run or times in 3 months)
Check of a condition of a suspension bracket and steering
Check of a condition of system of production of the fulfilled gases (each 12 000 km (7500 miles) run, or times in 6 months)
Check of level of transmission oil of a manual transmission (RKPP) (each 12 000 km (7500 miles) run, or times in 6 months)
Check of level of oil of a transfer case of all-wheel drive (4WD) of models (each 12 000 km (7500 miles) run, or times in 6 months)
Check of level of oil of differential (each 12 000 km (7500 miles) run, or times in 6 months)
Rotation of wheels (each 12 000 km (7500 miles) run, or times in 6 months)
Check of a condition of brake mechanisms (each 12 000 km (7500 miles) run, or times in 6 months)
Check of a condition of components of a power supply system (each 12 000 km (7500 miles) run, or times in 6 months)
Condition check, adjustment of a tension and replacement of a driving belt (each 12 000 km (7500 miles) run, or times in 6 months)
Check of a condition of seat belts (each 12 000 km (7500 miles) run, or times in 6 months)
Check of functioning of the sensor switch of permission of start (only models with AT) (each 12 000 km (7500 miles) run, or times in 6 months)
Chassis greasing (each 12 000 km (7500 miles) run, or times in 6 months)
Replacement of the air filter (each 48 000 km (30 000 miles) run, or times in two years)
Replacement of liquid and the filter of automatic transmission (each 48 000 km (30 000 miles) run, or times in two years)
Adjustment of tapes of automatic transmission (AT) (model since 1994 вып.) (each 48 000 km (30 000 miles) run, or times in two years)
Replacement of transmission oil of a manual box (switching) of transfers (RKPP) (each 48 000 km (30 000 miles) run, or times in two years)
Change of oil of a transfer case (4WD model) (each 48 000 km (30 000 miles) run, or times in two years)
Change of oil of differential (each 48 000 km (30 000 miles) run, or times in two years)
Service of system of cooling (an oporozhneniye, washing and filling) (each 48 000 km (30 000 miles) run, or times in two years)
Check of a condition and replacement of the valve of system of operated ventilation of a case (PCV) (V8) engines (each 48 000 km (30 000 miles) run, or times in two years)
Check, pro-cleaning and replacement of a hose of system of continuous ventilation of a case (CCV) (6 cylinder engines) (each 48 000 km (30 000 miles) run, or times in two years)
Check of serviceability of functioning of system of catching паров fuels (each 48 000 km (30 000 miles) run, or times in two years)
Cleaning of the filter of ventilation of a case (V8) engines (each 48 000 km (30 000 miles) run, or times in two years)
Replacement of the fuel filter (each 48 000 km (30 000 miles) run, or times in two years)
Replacement of spark plugs (each 48 000 km (30 000 miles) run, or times in two years)
Check of a condition of candle wires, covers and a distributor begunka (each 48 000 km (30 000 miles) run, or times in two years)
+ Ryadny six-cylinder engine
+ V8 Engine
+ Procedures of the general and major maintenance of the engine
+ Systems of cooling, heating and air conditioning
+ the Power supply system and production of the fulfilled gases
+ System of electric equipment of the engine
+ Systems of decrease in toxicity of the fulfilled gases and engine management
+ Manual box of gear shifting
+ Automatic transmission
+ Transfer case
+ Coupling and transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ System of onboard electric equipment
+ Governing bodies and operation receptions
|
Change of oil of differential (each 48 000 km (30 000 miles) run, or times in two years)
Plums
Procedure is made after oil warming up during a short trip. Warming up is necessary for simplification of an effluence of oil.
|
|
- To Poddomkratta the car also establish it on props.
- The simplest way of an oporozhneniye of differential is otsasyvany oils through a jellied opening by means of the sucking-away pump. If leaks through laying of a cover of differential take place, plums of oil can be carried out in a course (necessary in this case) removals of a cover of differential. Thus also there is a possibility to make check of a condition of internal components.
|
|
Oil change by means of the sucking-away pump
|
|
- Turn out from differential a jellied stopper (The section Check of level of oil of differential (each 12 000 km (7500 miles) run, or times in 6 months)).
- Insert into an opening a flexible hose.
- Push a hose in differential, having lowered its end to the bottom cases, and start to suck away oil by means of the pump.
|
|
- This way of an oporozhneniye of differential is the elementary: push in differential a flexible hose, having lowered its end on a bottom of the case and start to suck away oil by means of the pump connected to the opposite end of a hose.
|
|
|
Oil change by removal of a cover of differential
|
|
- Place under the car drain capacity, rags, old newspapers and wrenches.
- Give bolts of fastening of the bottom half of a cover. Weaken the top bolts, having left their screwed for cover fixing. Allow oil to flow down in drain capacity, then completely uncover.
- Pure, неворсящейся rags wipe an internal surface of a cover and available sites of an internal surface of the case of differential. Then check the merged oil on existence in it a splinter of a teeth of gear wheels and the small metal sawdust, speaking about need of carrying out more careful check of a condition of internal components of differential and regenerative repair or replacement.
- Carefully smooth out interfaced surfaces of the case and a plate of a cover of differential. By means of a prokladochny scraper remove from them all traces of a material of old laying.
- Impose on an interfaced surface of a flange of a cover a RTV hermetic layer, then press to a cover new laying. Track correctness of combination of boltovy openings of a flange and laying. Establish a cover into place.
|
|
Gulf
|
|
- By means of the manual pump, a syringe or a funnel fill differential with oil of a demanded grade so that its level reached the bottom cut of a jellied opening.
- Establish into place a jellied stopper and strongly tighten it.
|
|
|
|
