Jeep Grand Cherokee

1993-1999 of release

Repair and car operation



Jeep Grandee Cheroki
+ Jeep Grand Cherokee brand Cars
- Settings and routine maintenance
   - Schedule of routine maintenance of Jeep Cherokee
      Introduction
      General information on settings
      Checks of levels of liquids (each 400 km (250 miles) run or weekly)
      Check of a condition of tires and pressure in them (each 400 km (250 miles) run or weekly)
      Check of level of liquid of automatic transmission (each 400 km (250 miles) run or weekly)
      Check of level of liquid of system of hydrostrengthening of a wheel (each 4800 km (3000 miles) run or times in 3 months)
      Change of impellent oil and the oil filter (each 4800 km (3000 miles) run or times in 3 months)
      Check and battery service (each 4800 km (3000 miles) run or times in 3 months)
      Check of serviceability of system of cooling (each 4800 km (3000 miles) run or times in 3 months)
      Check of a condition and replacement of hoses passing under a cowl (each 4800 km (3000 miles) run or times in 3 months)
      Check of a condition and replacement of brushes of screen wipers (each 4800 km (3000 miles) run or times in 3 months)
      Check of a condition of a suspension bracket and steering
      Check of a condition of system of production of the fulfilled gases (each 12 000 km (7500 miles) run, or times in 6 months)
      Check of level of transmission oil of a manual transmission (RKPP) (each 12 000 km (7500 miles) run, or times in 6 months)
      Check of level of oil of a transfer case of all-wheel drive (4WD) of models (each 12 000 km (7500 miles) run, or times in 6 months)
      Check of level of oil of differential (each 12 000 km (7500 miles) run, or times in 6 months)
      Rotation of wheels (each 12 000 km (7500 miles) run, or times in 6 months)
      Check of a condition of brake mechanisms (each 12 000 km (7500 miles) run, or times in 6 months)
      Check of a condition of components of a power supply system (each 12 000 km (7500 miles) run, or times in 6 months)
      Condition check, adjustment of a tension and replacement of a driving belt (each 12 000 km (7500 miles) run, or times in 6 months)
      Check of a condition of seat belts (each 12 000 km (7500 miles) run, or times in 6 months)
      Check of functioning of the sensor switch of permission of start (only models with AT) (each 12 000 km (7500 miles) run, or times in 6 months)
      Chassis greasing (each 12 000 km (7500 miles) run, or times in 6 months)
      Replacement of the air filter (each 48 000 km (30 000 miles) run, or times in two years)
      Replacement of liquid and the filter of automatic transmission (each 48 000 km (30 000 miles) run, or times in two years)
      Adjustment of tapes of automatic transmission (AT) (model since 1994 вып.) (each 48 000 km (30 000 miles) run, or times in two years)
      Replacement of transmission oil of a manual box (switching) of transfers (RKPP) (each 48 000 km (30 000 miles) run, or times in two years)
      Change of oil of a transfer case (4WD model) (each 48 000 km (30 000 miles) run, or times in two years)
      Change of oil of differential (each 48 000 km (30 000 miles) run, or times in two years)
      Service of system of cooling (an oporozhneniye, washing and filling) (each 48 000 km (30 000 miles) run, or times in two years)
      Check of a condition and replacement of the valve of system of operated ventilation of a case (PCV) (V8) engines (each 48 000 km (30 000 miles) run, or times in two years)
      Check, pro-cleaning and replacement of a hose of system of continuous ventilation of a case (CCV) (6 cylinder engines) (each 48 000 km (30 000 miles) run, or times in two years)
      Check of serviceability of functioning of system of catching паров fuels (each 48 000 km (30 000 miles) run, or times in two years)
      Cleaning of the filter of ventilation of a case (V8) engines (each 48 000 km (30 000 miles) run, or times in two years)
      Replacement of the fuel filter (each 48 000 km (30 000 miles) run, or times in two years)
      Replacement of spark plugs (each 48 000 km (30 000 miles) run, or times in two years)
      Check of a condition of candle wires, covers and a distributor begunka (each 48 000 km (30 000 miles) run, or times in two years)
+ Ryadny six-cylinder engine
+ V8 Engine
+ Procedures of the general and major maintenance of the engine
+ Systems of cooling, heating and air conditioning
+ the Power supply system and production of the fulfilled gases
+ System of electric equipment of the engine
+ Systems of decrease in toxicity of the fulfilled gases and engine management
+ Manual box of gear shifting
+ Automatic transmission
+ Transfer case
+ Coupling and transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ System of onboard electric equipment
+ Governing bodies and operation receptions
0ea6cc78 0ea6cc78



Check of a condition and replacement of brushes of screen wipers (each 4800 km (3000 miles) run or times in 3 months)

Assemblies of screen wipers with brushes should be checked regularly on existence of damages, weakening of fastening of components, and also cracks and signs of wear of working elements of brushes.

Road film, accumulating on elements, essentially reduces efficiency of purification of glass therefore brushes should be exposed regularly to washing in clearing solution.

At operation of the mechanism of a drive of screen wipers there can be a spontaneous otdavaniye of bolts, nuts and the other fixture which condition in a type of the aforesaid also should be exposed to regular check and, in case of need, - to pulling up, at the same time to check of a condition of brushes.

If working elements of brushes (sometimes called also inserts) are considerably worn-out, deformed or растресканы, it is necessary to replace them new.

 PERFORMANCE ORDER

  1. Take away assemblies of levers of screen wipers with brushes from glass.
  1. On a cleaner of glass of a door of a back of models of early years of release, raise a lock rychazhok and remove brush assembly from a pin on the cleaner lever. Replacement is made all brushes assembled.
  1. On cleaners of a windscreen and a cleaner of glass of a back of models of late years of release wring out a uvula on the end of a clamp of a brush and remove assembly from the screen wiper lever, having delayed it down and having removed from a hook at an end face of the last.
  1. Separate an end face of a working element from a frame of assembly of a brush and by means of nippers take two instep supports. Then take from assembly a working element.
  1. Compare length and a design of new elements to the old.
  2. Insert a new element into a brush, then enter instep supports.
  3. Establish assemblies of brushes on levers, moisten glass and check serviceability of functioning of screen wipers.