Jeep Grand Cherokee

1993-1999 of release

Repair and car operation


Jeep Grandee Cheroki
+ Jeep Grand Cherokee brand Cars
- Settings and routine maintenance
   + Schedule of routine maintenance of Jeep Cherokee
+ Ryadny six-cylinder engine
+ V8 Engine
+ Procedures of the general and major maintenance of the engine
+ Systems of cooling, heating and air conditioning
+ the Power supply system and production of the fulfilled gases
+ System of electric equipment of the engine
+ Systems of decrease in toxicity of the fulfilled gases and engine management
+ Manual box of gear shifting
+ Automatic transmission
+ Transfer case
+ Coupling and transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ System of onboard electric equipment
+ Governing bodies and operation receptions

0ea6cc78 0ea6cc78

Settings and routine maintenance

Specifications

Recommended greasings and liquids

The card of vyazkost of impellent oil - for ensuring the best economy of fuel and maximum efficiency of operation of the engine try to choose the lowest on viscosity for an expected range of ambient temperatures SAE standard oil.


Type of impellent oil Universal, raising overall performance of the engine oil of the API standard of a grade of SF or SF/CC
Viscosity of impellent oil See the enclosed card of vyazkost
Type of liquid of automatic transmission (AT) Transmission Mopar ATF-Plus 7176 or Dexron III/Mercon liquid or their equivalent
RKPP transmission oil Transmission SAE 75W-90 API GL-5 greasing
Greasing of a transfer case Transmission liquid for AT Dexron III/Mercon
Differential oil
  • Usual functioning
  • Peredny Bridge
Transmission SAE 75W-90 API GL-5 greasing
  • Zadny Bridge
Transmission SAE 90W API GL-5 greasing
  • Stuffing of the back bridge for trailer towage
Synthetic transmission SAE 75W-140 greasing
  • For differential of limited sliding
To add a frictional additive of MOPAR Friction Modifier
Type of brake liquid Brake DOT 3 liquid
Liquid of system of hydrostrengthening of a wheel Hydraulic Mopar liquid for power steerings or its equivalent
Type of lubricant liquid of the steering mechanism of manual type Gipoidny transmission SAE 90 API GL-5 greasing
Type of greasing of the chassis Greasing for the NLGI No. chassis of 2 ER

Volumes (l) *

Impellent oil (taking into account filter change)
  • 6-cylinder engine
5,7
  • V8 engine
4,7
Cooling system
  • 6-cylinder engine
9,5
  • V8 engine
13,2
Automatic transmission (AT)
3,8 (plums and filling)
Manual box (switchings) of transfers (RKPP)
1,9
Transfer case
  • NP 231 (Command-Trac)
2,1
  • NP 242 (Selec-Trac)
2,8
  • NP 249 (Quadra-Trec)
2,4
Differential
  • The forward
2,8
  • The back
2,4

* All volumes are given approximately. Having added it is necessary to make proceeding from need of achievement of demanded level.

Ignition system

Type of spark plugs
  • 6-cylinder engine
Champion RC12LYC or its equivalent
  • V8 engine
Champion RC12YC or its equivalent
Candle gap (for all types of engines) (mm) 0,89
Ignition order
  • 6-cylinder engine
1 — 5 — 3 — 6 — 2 — 4
  • V8 engine
1 — 8 — 4 — 3 — 6 — 5 — 7 — 2

General parameters

Minimum admissible thickness of overlays of blocks of disk brake mechanisms (mm)
7,9
Minimum admissible thickness of overlays of boots of drum-type brake mechanisms (mm)
1,6
Effort of a tension of a driving belt (kgf)
  • The 6-cylinder engine (measurement is made by the special tool)
    • The new
80,1-89,0
    • Being in the use
62,3
V8 engine
The tension is regulated automatically

Arrangement of cylinders and the direction of rotation of the distributor - 6-cylinder engines.

Arrangement of cylinders and the direction of rotation of the distributor - V8 engines.

Adjustment of a tension of tapes of automatic transmission (AT) (model since 1994 вып.)

Forward tape
  • 42RE
8,1 N • m, back on 3-5/8 turns
  • 42RH
8,1 N • m, back on 2-1/2 turns
  • 46RH
8,1 N • m, back on 2-1/2 turns
Back tape
  • 42RE
8,1 N • m, back on 4 turns
  • 42RH
8,1 N • m, back on 4 turns
  • 46RH
8,1 N • m, back on 2 turns

Efforts of a tightening of carving connections, N • m

Lock-nut of the screw of adjustment of a tension of the AT forward tape
41
Lock-nut of the screw of adjustment of a tension of the AT back tape
34
Bolts of the pallet of a case of AT
16
Bolts of a cover of differential
47
Drain/jellied stopper of a transfer case
41 — 54
Spark plugs
34 — 41
Stopper plum of impellent oil
27
Oxygen sensor
27
Nuts of fastening of wheels
108 — 149

Arrangement of components in an impellent compartment - model with the V8 engine

1 — the Valve of management of system of ventilation of a case (PCV)
2 — Location щупа measurements of level of transmission liquid (AT) (щуп in a picture it is not visible)
3 — the Tank of brake liquid
4 — the Tank of liquid of washing of a windscreen
5 — the Cover of a mouth of the gulf of impellent oil
6 — an air purifier Casing
7 — a radiator Hose

8 — the Tank of liquid of system of hydrostrengthening of a wheel
9 — the Scheme of laying of a tape driving belt
10 — the Driving belt
11 — Shchup of measurement of level of impellent oil
12 — a radiator Cover
13 — the Battery
14 — a relay Box
15 — the Broad tank of system of cooling

The typical scheme of an arrangement of components in the lower part of an impellent compartment

1 — the Damper of a steering drive
2 — the Lubricant union of the hinge of steering draft
3 — the Jellied/control stopper of forward differential
4 — the Protective cover of a power shaft (4WD model)
5 — the Lubricant union of the driveshaft (4WD model)

6 — the Pallet of a case of AT
7 — the Pallet of a case of the engine
8 — System of production of the fulfilled gases
9 — the Disk brake mechanism of a forward wheel

The typical scheme of an arrangement of components under the bottom of a back of the car

1 — the Disk brake mechanism of a back wheel
2 — the Fuel filter
3 — the Control/jellied stopper of differential
4 — the Back shock-absorber

5 — System of production of the fulfilled gases
6 — the Back hinge of the driveshaft

Arrangement of components in an impellent compartment - model with the 6-cylinder engine

1 — Shchup of measurement of level of impellent oil
2 — Location щупа measurements of level of transmission liquid (AT) (in a picture it is not visible)
3 — the Cover of a mouth of the gulf of impellent oil
4 — the Hose of system of continuous ventilation of a case (CCV)
5 — the Tank of brake liquid
6 — the Tank of liquid of washing of a windscreen
7 — an air purifier Casing
8 — the Tank of liquid of system of hydrostrengthening of a wheel

9 — a radiator Cover
10 — the Driving belt
11 — a distributor Cover with wires
12 — the Scheme of laying of a tape driving belt
13 — a radiator Hose
14 — the Battery
15 — a relay Box
16 — the Broad tank of system of cooling