- Make a discharge of central air of air (cм. the prevention at the beginning of the Section Removal and installation of the accumulator (store) of central air of air).
- Disconnect a negative wire from the battery.
- Disunite the electric socket of the coupling of coupling of the compressor.
|
|
- Disunite the electric socket (shooter) on the compressor of the conditioner of air - what with one wire.
|
- Remove a driving belt (Head of Control and routine maintenance).
- Disconnect refrigerator lines from the top back part of the compressor. To Zakuporta the open ends of unions in order to avoid hit in moisture and dirt system.
|
|
- Refrigerator lines fasten to the compressor by means of bolts - to disconnect them follows by means of a wrench; after a detachment закупорьте openings in the compressor and the open ends of lines.
|
- To Otboltita the compressor from an arm also remove it from the car.
- If the compressor is replaced, following instructions of manufacturers merge previously excess of oil.
|
|
The new compressor should be suitable for the use in the systems filled by a coolant of the R-134a type. |
- The coupling of coupling can be transferred from the old compressor on the new.
- Installation make upside-down. Replace all sealing rings new (suitable for the use in the systems filled with oil of the R-134a type); before installation grease rings with refrigerator oil.
- In the same workshop where discharged system make its oporozhneniye, a charging and check on leaks
|
|
