Jeep Grand Cherokee

1993-1999 of release

Repair and car operation



Jeep Grandee Cheroki
+ Jeep Grand Cherokee brand Cars
+ Settings and routine maintenance
+ Ryadny six-cylinder engine
+ V8 Engine
+ Procedures of the general and major maintenance of the engine
+ Systems of cooling, heating and air conditioning
+ the Power supply system and production of the fulfilled gases
+ System of electric equipment of the engine
+ Systems of decrease in toxicity of the fulfilled gases and engine management
+ Manual box of gear shifting
+ Automatic transmission
+ Transfer case
+ Coupling and transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ System of onboard electric equipment
- Governing bodies and operation receptions
   Acquaintance to the car
   Start of the engine and driving
   Dashboard and salon equipment
   Trailer towage
   Emergency towage of the car
   Car towage for the purpose of engine start
0ea6cc78 0ea6cc78


Dashboard and salon equipment

Dashboard and podrulevy switches

General information

At the switched-off ignition measuring instruments of the dashboard can issue inexact indications. In need of receiving reliable information at the muffled engine turn the ignition key in the situation ON (see an illustration).

The scheme of an arrangement of components of the dashboard is presented on an illustration.

The scheme of an arrangement of components on the dashboard

1 — the Ventilating nozzle
2 — the Combination of devices
3 — the Radio receiver
4 — Ventilating nozzles
5 — the Ware box
6 — the Ventilating nozzle
7 — the Assembly block of safety locks
8 — the Control panel the provision of lateral mirrors

9 — the Control panel external lighting devices and panel illumination
10 — Switches of management of a cleaner/washer and a heater of back glass, the switch of blocking of the O/D OFF OD mode
11 — the Graphic display or an information display
12 — the Control panel functioning of systems of heating, ventilation and salon air conditioning

Combination of devices

At the same time to refusal of a speedometer, a tachometer or measuring instruments of impellent oil and temperatures of cooling liquid always there is a violation of functioning of the module of a safety cushion! Movement with the faulty module of a pillow dangerously! Check a safety lock No. 22 condition in the assembly block.

In the left we string to a corner of a combination of devices usually the measuring instrument of fuel consumption (1) settles down.

Combination of devices

1 — a fuel consumption Measuring instrument
2 — the Voltmeter
3 — the Tachometer
4 — the Speedometer
5 — the Odometer
6 — the Measuring instrument of pressure of impellent oil
7 — the Measuring instrument of temperature of cooling liquid
8 — the Control lamp of indexes of turns
9 — the Button of dumping of indications of the counter of range of the current trip
10 — the Counter of range of the current trip
11 — the Control lamp of low level of fuel

12 — the Control lamp of ABS
13 — the Control lamp of raising of the parking brake
14 — the Control lamp «Check the engine»
15 — the Control lamp of switching on higher transfer
16 — the Control lamp of a safety cushion
17 — the Control lamp of a driving beam of head headlights
18 — the Control lamp «Fasten belts»
19 — the Control lamp of the anticreeping alarm system

Above and slightly more to the right there is a voltmeter (2) which indications allow to define level of a charge of the storage battery and serviceability of functioning of system of a charge. Arrow lowering in a red zone of low level of a charge warns that the battery, possibly, is incapable to carry out engine start. For the working engine the range of indications of the voltmeter from 11 to 15 Century is normal. The long indication in 9 ÷ 11 In or over 15 In testifies to failure of the generator, a tension or battery regulator. Address for consultation to specialists of car-care center.

The big round board located more to the left is the indicator of a measuring instrument of turns of the engine (tachometer) (3). A unit of measure of a tachometer is rpm.

Do not allow leaving of an arrow of a tachometer in a red zone of a scale of its board - serious damage of the power unit can appear result!

The right big round board belongs to a speedometer (4). On the dial of a measuring instrument two scales, allowing to define speed of movement of the car in miles/h (the main scale) and km/h (an auxiliary scale) are put. The range of measurement of a speedometer makes from 0 to 100 miles/h (0 ÷ 160 km/h).

In the speedometer dial, slightly above an axis his shooters there is a counter of complete run of the car (odometer) (5). The counter is sealed up, broken into eight divisions and measures car run to within the tenth shares of mile.

Under an arrow of a speedometer the counter of range of the current trip (10) settles down. The button of dumping of indications of the counter (9) is on the right below under the speedometer dial.

Is more right than a speedometer on one with it level the measuring instrument of pressure of impellent oil (6) is placed. Indications of the counter do not define oil level in an engine case. Value of 20 ÷ 60 psi (1.4 ÷ 4.2 kgf/cm2) in city or 45 ÷ 60 psi (3.2 ÷ 4.2 kgf/cm2) is normal at movement on the highway. Pressure can change depending on turns of the engine, temperature and viscosity of the oil filled in it. For the heated-up engine working at single turns as norm the indication in 13 psi (0.91 kgfs/cm2) is. The constant low indication of a measuring instrument testifies about violation of serviceability of functioning of system of greasing - consult at specialists of dealer office of the Chrysler company.

In the right bottom corner of a combination of devices the measuring instrument of temperature of cooling liquid (7) is placed. The exit of an arrow of the device in a red range of a scale of a measuring instrument testifies to an engine overheat - thus it is necessary to muffle immediately it and immediately to address for the help in the closest workshop of car-care center.

Try not to leave the switched-on engine for a long time without supervision. The long overheat of the engine (if that occurs) is fraught with serious damages and expensive repair.

Control lamp of indexes of turns (8) start to blink at inclusion of the corresponding index (right or left).

The control lamp of low level of fuel (11) informs the driver on an approach by the end of a stock of fuel and lights up, when in a fuel tank there are about 11.2 l of fuel. At first the lamp can start to blink only, especially during the moments of commission of turns, braking and acceleration as the fuel weight in a tank is thus shaken.

The control lamp of ABS (12) lights up for short time at start the engine, informing the driver that knots of system function regularly. If the lamp does not die away after completion of start of the engine or lights up during movement, it testifies to identification by system of self-diagnostics of ABS of internal malfunctions. Thus the brake system continues to function in a usual mode, however ABS is disconnected. Switching off, and then inclusion of ignition can install system of anti-blocking of brakes again. If the lamp continues to join and after engine restarts, address for consultation in dealer office of the Chrysler company. If control lamps of ABS and the parking brake at the same time light up, address in a car-care center workshop immediately.

The control lamp of raising of the parking brake (13) at the included ignition informs the driver that the parking brake is cocked. The lamp also warns about falling of level and pressure of brake liquid in hydraulic system - in this case it is necessary to address immediately for the help to experts.

If a control lamp «Check the engine» (14) it is necessary to burn after engine start, or joins in movement time, it speaks about possible violations of functioning and/or need of performance of procedures of routine maintenance of the engine. Though the car does not lose thus working capacity and does not need towage, it is necessary to show at the first possibility it to specialists of dealer office of the Chrysler company.

Long operation of the car with the included lamp «Check the engine» can lead to serious damages of components of systems of decrease in toxicity of the fulfilled gases, but also, considerably fuel consumption thus can increase. The blinking of a control lamp means about possibility of approach of fast failure of the catalytic converter and serious decrease in efficiency of return of the engine - it is necessary to address immediately in a car-care center workshop. At the moment of engine start the control lamp should light up for short time, informing the driver on serviceability of the condition.

The control lamp of switching on higher transfer (15) is provided on all models from RKPP and informs the driver on need of increase of transfer at car dispersal for the purpose of maintenance of the most effective mode of fuel consumption.

The control lamp of a safety cushion (16) lights up and remains lit on 6 ÷ 8 seconds at the first inclusion of ignition. If the lamp does not die away after a successful conclusion of start of the engine or joins in movement time, the system of a safety cushion needs urgent check with attraction of efforts of specialists of dealer office of the Chrysler company.

The control lamp of a driving beam of head headlights (17) informs the driver that head headlights of the car function in a mode of a driving beam.

Control lamp «Fasten belts» (18) in a combination to an alarm buzzer warn the driver and passengers when landing in the car about need to be fastened. At a zastegivaniye of buckles of seat belts the buzzer is disconnected, and the lamp continues to burn within about 6 seconds.

The control lamp of anticreeping system (19) confirms turning on of the alarm system. At the serviceable alarm system the lamp should blink. If the lamp burns continuously, therefore the system failed.

Module of the graphic display of all-wheel drive models

On some models the module of the graphic display can is replaced information tably (see the following subsection).

The module of the graphic display of 4WD models is located in the bottom of the central part of the dashboard. On the screen of the display the outline drawing of the car which wheels can be highlighted by blue or green light is placed, informing the driver on the chosen mode of a transfer case. The car contour on the screen will have during daylight hours a white background which will be transformed to a bluish or bluish luminescence at night. To the left of a contour of the car the indicators of the PART-TIME and LO modes illuminated by yellow and FULL-TIME, illuminated by the green are located.
Location of the module of the graphic display on the dashboard of all-wheel drive models.

Models with a transfer case of COMMAND-TRAC

At a 2WD mode choice on an outline drawing of the car back wheels of the car are highlighted and no indicators do light up. When switching in a mode of changeable inclusion of a full drive (PART-TIME 4WD) all four wheels in a combination to the yellow PART-TIME indicator are highlighted. In the neutral provision of a control lever of a transfer case the screen of the display will be extinguished. The mode of continuous inclusion of a full drive (FULL-TIME 4WD) is accompanied by a podsvechivaniye of four wheels on an outline drawing of the car, plus of the green FULL-TIME indicator.

Models with a transfer case of SELEC-TRAC

At a 2WD mode choice on an outline drawing of the car back wheels of the car are highlighted and no indicators do light up. When switching in a mode of changeable inclusion of a full drive (PART-TIME 4WD) all four wheels in a combination to the yellow PART-TIME indicator are highlighted. The mode of continuous inclusion of a full drive (FULL-TIME 4WD) is accompanied by a podsvechivaniye of four wheels on an outline drawing of the car, plus of the green FULL-TIME indicator. In the neutral provision of a control lever of a transfer case the screen of the display will be extinguished. In a mode of lowering transfer of changeably included full drive (4LO - PART-TIME 4WD) are highlighted also all four wheels of the car and the PART-TIME indicator.

Models with a transfer case of QUADRA-TRAC

The mode of a full drive is designated by inclusion of illumination of all four wheels on an outline drawing of the car on the display screen. At inclusion of a lowering 4LO mode in addition to illumination of four wheels the LO indicator turns on. In the neutral provision of a box remains it will be extinguished.

Information center of the car

General information

On some models the place of the graphic display on the dashboard of the car occupies a special information display. On the screen of a board the outline drawing of the car, and more to the right of it - windows of the electronic display with two buttons of management is located.
Location of an information display on the dashboard of all-wheel drive models.

The control center of the indication of an information display carries out four main functions: highlighting on the screen of the current time and date; tracking of parameters of functioning of some systems of the car and the notice of the driver on the revealed violations (see in the item. "Notices of information center..."); highlighting of a reminder on need of performance of procedures of routine maintenance; and highlighting of the chosen mode of a transfer case.

Notices of information center stand out in the form of the visual message accompanied by a sound buzzer. The following messages of the center are the most typical:

  • Leaky closing of doors (Door Ajar) - delivery to five (by quantity of doors) various type of messages on leaky closing of doors Is possible. Each of car doors, and also folding glass of a door of a back are equipped with the special sensors which operation provides emergence on the screen of an information display of the corresponding message. In addition to the message on an outline drawing of the car the door demanding check is highlighted. After all doors / folding back glass will boards are densely closed should to go out.
  • Refusal of back lamps (Rear Lamp Failure) - This message appears on the board screen at failure of lamps of stoplights and back marker lights. To remove the message from the screen replace burned-down lamps.
  • Refusal of stoplights (Turn Signal On) - This message is highlighted appears in that case when forgotten included the index of turn continues to function throughout more than 1.6 km (1 mile).
  • Check the battery (Check Battery) - the Message informs the driver on a deviation from standard of target tension of the battery and is highlighted in case of tension lowering below 11.5 In or its exit for limiting value in 16 V.Dlya of message removal from the screen make necessary corrections.
  • Lowering of level of liquid of washing of glasses (Washer Fluid Low) - For removal of this message from the screen add necessary amount of washing liquid in the tank of system and include on new ignition.
  • Lowering of level of cooling liquid of the engine (Coolant Level Low) - Add demanded amount of liquid in a broad tank and repeatedly include ignition.

The information center of the car is equipped with the counter remaining till performance of the next procedures of routine maintenance of run. The corresponding message (xxx Miles to Service) is highlighted each time at ignition inclusion.

1 mile = 1.6 km.

Besides, the center reveals failures of sensors.

When the size of remaining run specified in the message is equal to zero, it is necessary to start performance of the next procedures of routine maintenance (see. Head of Control and routine maintenance). To null the counter, once press the SELECT button, then squeeze out and hold pressed during not less than two seconds (at the included ignition) the SET button.

Display of modes of a transfer case

The information center of the car provides delivery on the screen of the board of data on the chosen mode of a transfer case. The notice is transferred by a podsvechivaniye of wheels on an outline drawing of the car in a combination about turning on of the corresponding indicators, similar described above for the graphic display of a mode of a transfer case. In case of 2WD choice no indicators do light up.

Hours/calendar of information center

On a board two buttons of management (by SELECT and SET) are provided also. The first of them is intended for installation flowing times/dates. If a food was disconnected from the module, indications on a board (time, date) at inclusion of ignition start to blink. In this case it is necessary to make updating of data.

Include ignition (turn a key in the situation ON) and make sure that on an information display time and date are highlighted.

Press the SET button and hold it pressed until figures of indications of hours (HOUR) on the screen will not start to blink. Then release the button.

By short pressing of the SET button choose the correct hour indication of the current time (for fast "rewind" of the counter hold the button pressed).

By a nazhimaniye of the SELECT button pass to following installation in the order of value (respectively, minutes, day of week, month and number). Control of parameters is made besides by means of the SET button.

For entering of new data in memory of the center press the SELECT button.

Control of measuring scales of information center

Indications of an information display can stand out both in metric system of units, and in accepted in the USA, Great Britain and some other (mainly agnloyazychny) the countries. Center switching on habitual measuring system is made by means of the US/M button on the top console of the car.

For control of measuring scales of the center press the SET button panels of an information display and, holding it it is pressed, include ignition (having turned a key in the situation ON). On the screen of a board the name of the language of messages chosen during the last control will be highlighted. For highlighting of the following on a lock from brought memory of the center of languages use the SELECT button. With pressing of the SET button confirm the made choice.

After end of a choice of language of messages the center will switch an information field of the screen to timeline control (12-hours or 24-hour) - the choice is carried out besides by the SELECT button and proves to be true in SET button pressing.

After a timeline control of a scale of counting remaining before performance of the next procedures of routine maintenance of run is made. The choice of a step is carried out by the SELECT button. At will it is possible to adjust the center so that the message stood out for any number of miles/km from 2 000/3 000 to 7 500/12 000 with a step in 500 miles/1 of 000 km. Fix the made choice by means of the SET button.

Combined podrulevy the switch

Indexes of turns

Inclusion of indexes of turns is made by moving of the lever of the combined podrulevy switch located at the left on a steering column in the vertical plane. At lever shift indexes of the right turn, down, respectively, - left up join. Functioning of indexes is duplicated by control lamps on an instrument guard of the car. The control lamp of the corresponding turn continues to blink in unison with the index during the whole time of inclusion of the last. If any of control lamps joins in a mode of a constant luminescence, or starts to blink with twice bigger frequency than the second, check a condition of lamps in blocks of indexes. If one of control lamps at all does not work at inclusion of the corresponding index, check its condition, and also a condition of a safety lock of this electric chain.

Temporary switching of light of head headlights
Inclusion of indexes of turns.

To switch head headlights from a mode of a passing beam in a mode distant (or on the contrary), simply pull on itself the lever of the combined podrulevy switch.

Alarm system head headlights during daylight hours

To beep light to the driver of other vehicle during daylight hours when head headlights are switched off, besides it is necessary to pull on itself the lever of the podrulevy switch. The driving beam of head headlights thus will join and will continue to burn until the lever will not be released.

Management of cleaners and windscreen washers

Management of cleaners and washers of glass is made also by means of the combined podrulevy switch. The choice of a high-speed mode of functioning of screen wipers is made by handle turn on the end of the lever of the switch in the relevant situation. Inclusion of washers is made by button squeezing at an end face of the handle of the lever of the switch.
Inclusion of washers of a windscreen.

Sudden loss of transparency of a windscreen can lead to loss of control of driving and hit in an emergency! To avoid an obmerzaniye in frosty weather, before starting glass washing, warm up it a way обдува hot air of a heater.


In cold weather before suppressing the engine do not forget to switch off screen wipers, watching thus that they came back to the parking situation. If not switched off brushes freeze to glass, at engine start they can appear are damaged.

The switch allows to include screen wipers in an interval mode of functioning with a choice convenient delay time between cycles. In order that the delay was maximum, turn the handle on the end of the lever of the podrulevy switch to the top border of a range of a choice of time of a delay (see an insert on an illustration above). As approaching LO mark duration of pauses is reduced up to transition to a mode of continuous functioning. The maximum time of a delay makes 20 seconds, minimum - 2 seconds.

For inclusion of washers of glass press and hold pressed the button on the end of the handle of the lever. Button squeezing at included screen wipers brings cleaners into an interval mode of functioning will continue to work within several more seconds after its otpuskaniye, then will return to a mode of originally chosen delay. If to press the button of inclusion of washers of glass at the switched-off screen wipers, there will be an automatic operation of the last. After an otpuskaniye of the button of a brush will make still full three cycles of purification of glass, then will return to parking situation.

Switch of management of functioning by a cleaner/washer of back glass of the car

The 3-item polzunkovy switch, located more to the right of a steering column is intended to the control panel for management of functioning of a cleaner/washer of glass of a door of a back of the car. Activation of a screen wiper is made by transfer a switch rychazhka in the situation DELAY or ON. For washing flew down to wring out enough a rychazhok inside in any of its three provisions. The pump of a washer will continue to function until the button will not be released. The cleaner thus is also automatically activated. After a button otpuskaniye the brush of a cleaner will make three more full cycles then itself will return to parking situation.
Switch of management of a cleaner/washer of back glass.

If to switch off ignition at a working cleaner of back glass, its brush before a stop will automatically return to parking situation. Thus at engine start the brush will not continue the movement if the switch not to return at first to the situation OFF.

On the models equipped with folding glass of a door of a back an electric chain of a screen wiper automatically it is broken off at the moment of opening of such glass.

Switch of a heater of back glass

In order to avoid damage of threads of a heating element of a heater of back glass, use for its rubbing only soft rags and show the corresponding care. Try not to touch glass from within salon firm subjects!

On the same panel, directly under the switch of management the back screen wiper/washer located the switch of a heater of back glass. At heater inclusion under the button of the switch the control lamp of yellow color lights up. To switch off a heater, press the button repeatedly.

The heater of back glass is equipped with the timer making its automatic shutdown about ten minutes later continuous functioning. Such precautionary measure allows to avoid a battery discharge in case of a heater zabyvaniye included (the heating element is the power-intensive consumer of the electric power). In need of renewal of work of a heater press the switch button repeatedly about five minutes later. In order to avoid a podsadka of the battery use a heater only at the switched-on engine.

At the corresponding complete set of the car at the same time to a heater (at the command of the same switch) there is an activation of heaters of external rear-view mirrors.

Switches of management external illumination/illumination of the dashboard

Do not blind drivers of counter vehicles fog lights - intensity of illumination of their radiation is rather great to appear dangerous!

The rotary handle on the panel of switches located to the left of a steering column serves for management of external lighting/alarm devices. On equipped with automatic equipment of inclusion of head and fog lights models the handle has five stationary provisions. For activation of automatic equipment turn the handle from the situation OFF counter-clockwise. Handle turn on one division from the situation OFF clockwise leads to inclusion of running/parking fires. Handle turn on one division running fires join in a combination to head headlights. Further turn clockwise carries out activation of the fog lights which inclusion is accompanied by initiation of a yellow control lamp.
The handle of management external illumination/illumination of devices and a potentiometer of intensity of illumination (the toddler under the handle).

Functioning of fog lights becomes possible only under condition of inclusion of a passing beam of head headlights. At transfer of the last to a mode of a driving beam fog lights are automatically disconnected.

Automatic equipment of activation of head headlights (additional complete set of the car)

As it was already noted above, for turning on of automatic equipment it is necessary to turn the handle of management of external lighting from the situation OFF counter-clockwise.

The device has two distinctive features. At the included ignition (a key in the situation ON/RUN) and the handle turned in the situation AUTO, head headlights of the car depending on intensity of illumination of the district. The second feature of the device is providing a delay of shutdown of external lighting devices of the car at ignition switching off.

Management of intensity of illumination of devices

The Polzunkovy potentiometer of intensity of illumination of the dashboard is located directly under the handle of management of external lighting devices on the panel of switches to the left of a steering column (see an illustration above). In order to avoid the visual hindrances created by illumination of the dashboard, intensity of a fluorescent luminescence of displays at inclusion of head headlights or parking fires automatically decreases during daylight hours to a minimum. Intensity of illumination of monitors is subject to smooth adjustment from zero to some maximum value by moving a rychazhka of a polzunkovy potentiometer from left to right. To the maximum value of intensity of illumination there corresponds situation a rychazhka opposite to vertical risks on a symbolical scale under a potentiometer frame. When moving a rychazhka still also all lamps of illumination of salon in public the car more to the right join.

Inclusion of day running fires (only Canadian models)

At ignition key turn in the situation ON/RUN there is an inclusion of head headlights of the car which continue to burn until ignition will be switched off or the parking brake is cocked. The driving beam thus will work only on polovinny intensity of illumination.

Turning on of the alarm system

The button of turning on of the alarm system is located from above on a steering column. At activation of the alarm system lobbies and back indexes of both turns start to blink at the same time. The control lamp in the button also starts to blink. Switching off of the alarm system is made by repeated pressing the same buttons.
Turning on of the alarm system.

Long use of the alarm system at the switched-off engine can lead to a podsadka of the storage battery.

Management of an inclination of a steering column

At all do not make adjustment of an inclination of a steering column during movement it it is very dangerous!

With a view of simplification of access to salon, and also for ensuring the maximum comfort to the driver the car is equipped with a steering column of inclined type. The control lever is located the provision of a column at the left on its casing (behind the combined podrulevy switch).
Control lever inclination of a steering column.

Pull a control lever a column inclination on itself and move a steering wheel to convenient situation (down or up). Column blocking in new situation occurs automatically at a lever otpuskaniye.

Control panel systems of heating, ventilation and air conditioning

Switches of management of systems of heating, ventilation and air conditioning of salon are incorporated on the general panel and are executed in the form of rotary handles. By a manipulation these handles it is possible to achieve comfortable climatic conditions in car salon.
Control panel systems of heating, ventilation and air conditioning.

Rotation of the left handle allows to choose a demanded high-speed mode of rotation of the fan of a heater (a range from LO (small speed) to HI (high speed)).

The electromotor of a krylchatka of the fan remains zapitanny until the system will not be disconnected by turn of the average handle in the situation OFF, or ignition will not be switched off yet.

Smooth installation by air temperature in salon is carried out by turn clockwise the right handle of the control panel. Than the handle, especially warm air is more strongly turned will move in car salon.

At turn to the handle extreme right situation joins a mode of the closed retsirkulyatsiya of the air, providing the maximum speed of warming up of air.

The choice of the direction of distribution of air forced in salon is carried out by means of the average handle of the control panel. The handle has six stationary provisions:

  • The situation OFF (1 - see an illustration above) serves for shutdown of giving of a food on the electromotor of the fan of a heater and a giving perekryvaniye in salon of external air.
  • At transfer of the handle to situation (2) air forced in salon moves through the ventilating nozzles located on the dashboard.
  • The choice of situation (3) allows to carry out air distribution in two directions - through nozzles of the dashboard and a nozzle of foot wells.
  • In situation (4) air moves in salon only through ventilating nozzles of foot wells from under the dashboard (forward wells) and from under forward seats (back wells).
  • Situation (5) serves for distribution of forced air between nozzles of foot wells (forward and back) and nozzles обдува a windscreen.
  • Extreme right situation (6) allows to direct air only on having blown in a windscreen for the purpose of fast warming up in it in cold or damp weather.

With a view of economy of fuel consumption try not to include without need the sixth mode of the direction of distribution of air.

For turning on of the conditioner of air squeeze out the button located between average and right handles of the control panel, then by means of all three achieve optimum climatic conditions in salon.

Nozzles обдува lateral glasses

On all cars of the Grand Cherokee brand possibility обдува glasses of both forward doors is provided. Air sleeves of system of heating/ventilation are connected to the nozzles located on each side to the dashboard. Supply of air in these nozzles is carried out at a choice of modes (3) and (4).

The control panel of system of automatic correction of air temperature in salon (an additional complete set)

Automatic mode of maintenance of the set temperature

The system of automatic adjustment of temperature (automatic telephone exchange) constantly supports climatic conditions in car salon at an optimum level (at the choice of the operator). Functioning of system is based on the basis of signals of several information sensors. Thus the sensor of temperature of internal air is built in in the dashboard to the right of the automatic telephone exchange control panel. The sensor of temperature of external air is fixed behind a radiatorny lattice on the panel of a front of the car. The sensor of sunlight inserted into a forward part of the dashboard close is provided also snuffled обдува a windscreen.

The automatic telephone exchange system differs extreme simplicity in management. Begin with installation of the average rotary handle in the situation AUTO. Then by rotation of the right handle choose value of temperature (/° C) which to you would be to be supported in salon - value of temperature will be highlighted by °F on the screen of the display located in the right top corner of the control panel and it will be automatically supported by system.

The display can be adjusted on indication of temperature both in degrees Fahrenheit (°F), and in degrees Celsius (°C) - the choice is carried out by means of the US/m button on the top console of the car.


The control panel of system of automatic correction of air temperature in salon.

The left handle of the panel is intended for adjustment of a high-speed mode of rotation of a krylchatka of the fan of a heater. In the situation AUTO the choice only between modes of small (LO) and high (HI) in the speeds of rotation is possible. After the system will be adjusted on a certain temperature mode of installations any more it is not required - the temperature in salon will be supported at the set level automatically.

Manual adjustment of climatic conditions in salon

At desire the control panel of automatic telephone exchange can use for manual adjustment of climatic conditions in salon. Deduce the left and average handles of the panel from the provisions AUTO and choose with their help desirable modes of speed of rotation of the fan and the direction of distribution of air (the choice is carried out as well as in case of systems of heating/ventilation of usual type.

Inclusion To/in probably only in a manual mode of functioning of system by means of the А/С button on the control panel.

If air outside of salon has a fetid odor or is strongly dusty/is filled with smoke possibility of inclusion of a mode of the closed retsirkulyatsiya of internal air is provided. Press the RECIRC button (besides only in a manual mode of functioning of system). This mode allows to cool also quickly air in salon. When squeezing the RECIRC buttons and А/С on the display of the control panel the corresponding symbols are highlighted. Both modes can get out both in an individual order, and in a combination to other installations. Repeated squeezing of buttons leads to shutdown of modes.

In an automatic mode of functioning of automatic telephone exchange system turning on of the fan of a heater at cold start of the engine is made with a certain delay that allows to avoid empty circulation of cold air on salon. At mode inclusion обдува windows of beliefs it will be started immediately. It is possible to start also it, having deduced the handle from the situation AUTO.

Condensate removal from glasses

In rainy, damp weather of glass of the car tend to a zapotevaniye from the inside. For removal of condensate it is necessary to choose the direction of distribution of air submitted to salon on dashboard nozzles (2 - see the illustrations Control panel as systems of heating, ventilation and air conditioning and the Control panel of system of automatic correction of air temperature in salon), pressing of the А/С button to turn on the conditioner of air and to set one of high-speed operating modes of the fan. Develop zhalyuziyny lattices of the lateral snuffled dashboards so that that air moved on glasses of forward doors. From a windscreen condensate can be quickly removed with a way of a choice of its mode обдува (6 - see the illustrations Control panel systems of heating, ventilation and air conditioning and the Control panel of system of automatic correction of air temperature in salon).

Does not follow for a long time individually (out of a combination with To/in) to include the RECIRC mode (see an illustration the Control panel of system of automatic correction of air temperature in salon) as it can lead to an internal zapotevaniye of glasses.

Grand Cherokee cars are equipped with also door nozzles обдува lateral glasses. Air sleeves are connected to a control system of climate and provide having blown in lateral glasses in provisions 3 and 4 (see the illustrations Control panel systems of heating, ventilation and air conditioning and the Control panel of system of automatic correction of air temperature in salon) in handles of a choice of the direction of distribution of an air stream.

Electronic clock

Hours are built in in the radio receiver control panel. The liquid crystal indicator highlights on the screen the current hour and minutes constantly at the ignition key turned in the situation ON or ASS.

At the switched-off ignition (a key in the situation OFF) or when the screen of the display is used for indication of the chosen radio frequency, time continues to be counted automatically.

Procedure of installation of time is described below in the following subsection devoted to audiosystems of Chrysler.

Audiosystems of a firm complete set of Chrysler

Instructions for use a stereoradio tape recorder with AM/FM the tuner

A food on a radio tape recorder moves via the ignition switch therefore using by it becomes possible only in the key provisions ON or ASS.


For successful reproduction of tape recordings in frosty weather right after initial start of the engine it is necessary to wait some time necessary on warming up of components of the tape drive mechanism. Sometimes bad quality of reproduction appears connected with a film condition - try to replace the cartridge, having filled instead of suspicious the obviously serviceable.


Cleaning and podmagnichivaniye of reproducing heads of a player should be made at least twice a year.

Appearance of the control panel of a radio tape recorder is presented on an accompanying illustration.
The radio tape recorder control panel with AM/FM the tuner.

Inclusion of a food is carried out by turn clockwise VOL/POWER handles at the left above on the radio tape recorder control panel. Further rotation of this handle in the same direction leads to increase in loudness of sounding.

Management of sound frequencies is carried out by means of polzunkovy potentiometers of BASS and TREB. Shift of rychazhok up increases level respectively low or high frequencies, their lowering down - reduces level.

The choice of a listened radio frequency is carried out by means of the TUNE handle. The handle turns clicks with a step of change of a radio frequency in 10 kHz in an AM mode and in 2 MHz in the FM mode.

Balancing of distribution of a sound between the right and left loudspeakers is carried out by means of the ring located under the VOL/POWER handle with a rychazhok, marked on the radio tape recorder control panel an inscription of BAL and equipped with a symbolical scale with letters of L and R (To the Left/to the right).

The SEEK key is intended for search of busy frequencies of the corresponding range of broadcasting of increase, or decrease. The radio receiver will continue to reproduce new frequency while the choice will not be changed. If a key to hold pressed continuously, transition will be carried out without stops.

The choice of a range of frequencies of broadcasting is carried out by means of the AM/FM button in the top part of the control panel. Each pressing of the button leads to range switching. The made choice is reflected in the liquid crystal display by highlighting of the corresponding label more to the right of a field of indication of frequency. If the chosen radio station carries out a stereobroadcasting, ST mark will in addition be highlighted also.

In a mode of reproduction of a FM range the radio receiver carries out an automatic zaglushivaniye of intermediate waves with weak level of reproduction or with high level of noise. To reproduce such frequency voluntarily, adjust on it the tuner and press the SEL button.

To bring the fallen in love radio channel in memory of a radio receiver, press the SET button - on the screen of the display SET 1 inscription will be highlighted. Choose one of press buttons in the lower part of the control panel and once press it. Now at a nazhimaniye on this button the chosen radio frequency will be reproduced.

If the press button is pressed with a delay more than 5 seconds after the SET button otzhimaniye, the chosen frequency will not be brought in memory of a radio receiver, though will continue to be reproduced.

To each of five press buttons it can be appropriated to two radio channels in both ranges (2 of FM and 2 of AM). To use the button for reproduction of the second radio frequency during control press the SET button twice - on the screen of the display SET 2 message should be highlighted. Then press the chosen press button. Now, to reproduce the first radio frequency appropriated to the button on it it is necessary to press once, for reproduction of the second frequency - two. Thus, as press buttons five, all in memory of a radio receiver 10 stations from a range of FM and 10 - from AM range can be brought.

To switch a functioning mode radio tape recorders (radio/tape recorder) press the VOL/POWER button handle (on the right under it there is SEL-PUSH mark.

Upon transition to reproduction of tape recordings the system of suppression of noise of Dolby automatically joins. At will of the operator the system can be disconnected manually for what after film introduction in a kassetopriyemnik, press the button 1/00 - on the screen of the display NR inscription more to the right of a field of indication of radio frequencies/hours should go out. Reaktivatsiya of system is made automatically at each insertion of a film in a kassetopriyemnik.

The EJT button of the control panel of a radio tape recorder is intended for cartridge extraction from a kassetopriyemnik. The radio receiver tuner thus can be both is included, and switched off. If, without taking the cartridge from a kassetopriyemnik, to switch off radio/ignition, clamping and a magnetic head of a player will be taken automatically away from a film.

Two buttons located more to the right of a kassetopriyemnik with the image of double arrows are intended for the accelerated rewind of a magnetic tape forward or back. Thus rewind forward is made by a nazhimaniye on that from the buttons which direction of arrows coincides at present with the direction of scrolling of the magnetic tape, reflected in the display screen. For a film otmatyvaniye press respectively the second button back. By pressing the button is blocked and rewind proceeds until the film will not come to an end and will not be switched to reproduction in an opposite direction. To suspend rewind, press the second of buttons.

At desire to replace the direction of reproduction of a film press once the VOL/POWER button handle - highlighted on the screen of the display of the shooter will change the direction to the opposite.

In the course of reproduction of a tape recording on the main information field of the display the current time will continue to be highlighted, slightly symbols of the direction of rotation of a film and activation of system of suppression of noise of Dolby more to the right will take place. Reinstallation of hours can be made without player shutdown.

Instructions for use a stereoradio tape recorder with AM/FM the tuner and a graphic equalizer

A food on a radio tape recorder moves via the ignition switch therefore using by it becomes possible only in the key provisions ON or ASS.


To begin acquaintance to a radio tape recorder follows from installation of rychazhok of management by an equalizer in 3.102 provisions shown on an illustration. Loudspeakers should be отбалансированы evenly.


For successful reproduction of tape recordings in frosty weather right after initial start of the engine it is necessary to wait some time necessary on warming up of components of the tape drive mechanism. Sometimes bad quality of reproduction appears connected with a film condition - try to replace the cartridge, having filled instead of suspicious the obviously serviceable.

Appearance of the control panel of a radio tape recorder is presented on an illustration.

The radio tape recorder control panel with AM/FM the tuner and a graphic equalizer.

Inclusion of a food of a radio tape recorder is carried out by turn clockwise VOL/OFF handles. Further rotation of the handle leads to increase in loudness of sounding of system.

The control unit a graphic equalizer consists of 5 polzunkovy potentiometers, the average which provision of rychazhok is noted by dredging in the directing. The rychazhka up or down leads transfer respectively to increase or decrease in level of corrected frequency (it is specified under each of rychazhok).

At the included radio receiver the system of dynamic suppression of noise is constantly involved. The system of suppression of noise of Dolby is activated automatically at player inclusion, however can be disconnected at will of the operator by a nazhimaniye way on the DOLBY button - on the screen of the display NR (Dolby) inscription should go out. Reaktivatsiya of system is made at each introduction of the cartridge in a kassetopriyemnik.

Switching of radio frequencies (in both directions) is made by means of the TUNE key. Switching of frequencies is made continuously while the key will not be released with process reflection on the display screen.

Balancing of distribution of sounding between four columns is made by means of a turbo regulator located in the right bottom corner of the control panel of a radio tape recorder.

Switching of a range of broadcasting is made by means of the AM/FM button. The chosen range is reflected in the display screen near a field of indication of frequency. If the radio station working at the chosen wave makes a stereobroadcasting, near a symbol of a range of frequencies with some delay ST letters will be highlighted.

The radio receiver allows to carry out reception of radio stations of a stereobroadcasting of the Motorola C-Quam® trademark, AM working in a range - at reproduction of such channels on the display screen the ST symbol also is highlighted.

To bring the fallen in love radio channel in memory of a radio receiver, press the SET button - on the screen of the display SET 1 inscription will be highlighted. Choose one of press buttons in the lower part of the control panel and once press it. Now at a nazhimaniye on this button the chosen radio frequency will be reproduced.

If the press button is pressed with a delay more than 5 seconds after the SET button otzhimaniye, the chosen frequency will not be brought in memory of a radio receiver, though will continue to be reproduced.

To each of five press buttons it can be appropriated to two radio channels in both ranges (2 of FM and 2 of AM). To use the button for reproduction of the second radio frequency during control press the SET button twice - on the screen of the display SET 2 message should be highlighted. Then press the chosen press button. Now, to reproduce the first radio frequency appropriated to the button on it it is necessary to press once, for reproduction of the second frequency - two. Thus, as press buttons five, all in memory of a radio receiver 10 stations from a range of FM and 10 - from AM range can be brought.

The SEEK key is intended for search of busy frequencies of the corresponding range of broadcasting of increase, or decrease. The radio receiver will continue to reproduce new frequency while the choice will not be changed. If a key to hold pressed continuously, transition will be carried out without stops.

Nazhimany on the SCAN button carries out transition from one busy frequency of the chosen range to another. At an entrance in a search mode on the screen of the display MS letters are highlighted. Thus the tuner carries out a 5-second delay on each of revealed to frequency. For an exit from a mode it is enough to press any of the following buttons: SET, SEEK, TIME/PROG, SCAN or TUNE. At a nazhimaniye on the AM/FM button search will proceed already in other range.

Cartridge introduction in a kassetopriyemnik of a player should be made without any effort. Carefully fill the cartridge, having developed it the working party to the right and the mechanism of a kassetopriyemnik will smoothly involve it in a player.

The accelerated rewind of a film forward is made by a nazhimaniye on FF marked with letters a half of the TAPE key located in the right top corner of the control panel. On the screen of the display respectively directed double arrow will be highlighted. Rewind will proceed until the key will not be repeatedly pressed, or the film will not come to an end yet and reproduction of its reverse side will begin. Film rewind is carried out similarly at the expense of a nazhimaniye on RW marked with letters a key half back.

SEEK key use in a mode of reproduction of the tape recorder joins search of the beginning current or following in the order of record. On the screen of the display MS letters are highlighted. If to press the bottom half of a key in the first five seconds of reproduction of a thing, transition to the beginning of the previous record on a film will be carried out. At film reproduction in a programming mode function of search is disconnected automatically.

Change of the direction of rotation (the reproduction party) films is made by a short nazhimaniye on the TIME-PROGRAM button. The shooter specifying the direction of reproduction on the screen of the display also it will be developed on 180 °.

Cartridge extraction from a kassetopriyemnik is carried out by means of the EJT button. Extraction can be made without a preliminary stop of a mode of reproduction of record.

At installation in a kassetopriyemnik of a standard film on 70 mS, the player will automatically make alignments of a dynamic range of frequencies, and on the screen of the display the symbol 70 will be highlighted.

By Otpuskaniye of a clamping roller and branch of a magnetic head are made automatically at radio tape recorder or ignition switching off that allows to protect the film left in a kassetopriyemnik from casual damage. At food inclusion the roller and a head come back into position.

Stereosystem of listening of radio channels of AM-FM of a range and compact discs with a graphic equalizer

A food on a radio tape recorder moves via the ignition switch therefore using by it becomes possible only in the key provisions ON or ASS.


At movement on a rough paving reproduction from a compact disc can automatically stop. The same can occur in case of use of a poor-quality disk.

Appearance of the control panel of a stereosystem is presented on an illustration.

The control panel of stereosystem AM/FM - CD.

To bring the fallen in love radio channel in memory of a radio receiver, press the SET button - on the screen of the display SET 1 inscription will be highlighted. Choose one of press buttons in the lower part of the control panel and once press it. Now at a nazhimaniye on this button the chosen radio frequency will be reproduced.

If the press button is pressed with a delay more than 5 seconds after the SET button otzhimaniye, the chosen frequency will not be brought in memory of a radio receiver, though will continue to be reproduced.

To each of five press buttons it can be appropriated to two radio channels in both ranges (2 of FM and 2 of AM). To use the button for reproduction of the second radio frequency during control press the SET button twice - on the screen of the display SET 2 message should be highlighted. Then press the chosen press button. Now, to reproduce the first radio frequency appropriated to the button on it it is necessary to press once, for reproduction of the second frequency - two. Thus, as press buttons five, all in memory of a radio receiver 10 stations from a range of FM and 10 - from AM range can be brought.

Inclusion of a food of a radio tape recorder is carried out by turn clockwise VOL/OFF handles. Further rotation of the handle leads to increase in loudness of sounding of system.

The SEEK key is intended for search of busy frequencies of the corresponding range of broadcasting of increase, or decrease. The radio receiver will continue to reproduce new frequency while the choice will not be changed. If a key to hold pressed continuously, transition will be carried out without stops.

Switching of a range of broadcasting is made by means of the AM/FM button. The chosen range is reflected in the display screen near a field of indication of frequency. If the radio station working at the chosen wave makes a stereobroadcasting, near a symbol of a range of frequencies with some delay ST letters will be highlighted.

Nazhimaniye on the AM/FM button in the course of reproduction of records from a compact disc on the screen of the display appears the message PAUSE (Pause), and the system is switched in a broadcasting mode.

Nazhimany on the SCAN button carries out transition from one busy frequency of the chosen range to another. At an entrance in a search mode on the screen of the display SCAN letters are highlighted. Thus the tuner carries out a 5-second delay on each of revealed to frequency. At desire to stop on one of stations press the button repeatedly. Otherwise search will proceed.

The control unit a graphic equalizer consists of 5 polzunkovy potentiometers, the average which provision of rychazhok is noted by dredging in the directing. The rychazhka up or down leads transfer respectively to increase or decrease in level of corrected frequency (it is specified under each of rychazhok).

Switching of radio frequencies (in both directions) is made by means of the TUNE key. Switching of frequencies is made continuously while the key will not be released with process reflection on the display screen.

Within the first two seconds of keeping of a key pressed switching will occur to small speed which then will sharply increase.

Nazhimaniye on the TIME button in a mode of reception of radio channels leads to temporary highlighting on the display current time and date.

Balancing of distribution of sounding between four columns is made by means of a turbo regulator located in the right bottom corner of the control panel of a radio tape recorder.

To start reproduction of records from a compact disc it is necessary to turn the ignition key in the situation ON or ASS, and also to include a system food by VOL/OFF handle turn.

Disk introduction in a reception nest of a player, no less than its extraction, can be carried out at the switched-off radio receiver.

If to insert a disk at the included ignition and the switched-off radio receiver, on the screen of the display the message PAUSE (Pause) then the indicator will be switched to time/date display will be highlighted.

At food inclusion by VOL/OFF handle turn the system will be switched in a reproduction mode from a compact disc which will begin at once after its introduction in a reception nest of a player. Automatic reproduction always begins with the first record on a disk.

The PAUSE/PLAY button is intended for a reproduction suspension from a compact disc (on the screen of the display PAUSE inscription is highlighted). After pause removal reproduction will begin with that moment on which it was interrupted. If the disk was not completely entered into a reception nest of a player, at a nazhimaniye of this button there will be its automatic retraction and the beginning of reproduction of the first record.

The SEEK key pressing in a reproduction mode from a compact disc leads to transition to the beginning of the current record or transition to following one after another.

The FF/Disc/FR key is intended for a fast prokruchivaniye of records on a compact disc in this or that party.

At a single nazhimaniye on the SCAN button in a CD player mode on the screen of the display the inscription of the same contents will be highlighted. In the button the control lamp will light up. Thus the player will start to reproduce serially the beginning (for 10 seconds) each of records present on a disk. The exit from a mode of acquaintance is made by repeated pressing of the button.

The EJECT button is intended for disk unloading from a reception nest of a player. The system thus automatically passes to a radio reception mode. If the disk is not taken from a reception nest within 15 seconds after unloading, there will be its return retraction to system switching in the PAUSE mode.

Extraction of a disk possibly and at the switched-off radio receiver.

The TIME button as well as in a mode of reproduction of radio frequencies it is intended for temporary highlighting current time and date.

If the laser device of a player appears is incapable to reproduce information written down on a compact disc, on the screen of the display there will be a message ERR (Mistake). Mechanical defect of a disk, and also formation of condensate belong to number of the reasons conducting to such refusals on optical components of the input reader car jolting at movement on the rough road, the wrong orientation of a disk in a reception nest of a player.

Reproduction of record can be suspended in case of a device overheat. thus on the display screen in a delay about 20 ÷ 30 seconds there will be CD HOT message, and the system will be switched in a radio reception mode. On the screen PAUSE inscription will be highlighted.

When excessively low temperature of the device leads to errors of reading from a disk, on the screen of the display COLD inscription is highlighted. The device is switched to radio reception.

Ware box of the dashboard

The ware box is located in the right part of the dashboard of the car. The box has individual lighting. The lamp continues to burn all the time while the cover of a box remains open - pay attention to density of closing of a cover in order to avoid a discharge of the onboard battery.

Lighter and forward ashtray

In order to avoid children's overindulgence the lighter functions only at the included ignition (a key in the situation ON). To heat a heating element of the lighter it it is necessary to drown in the nest. On reaching sufficient temperature the working element of the lighter is automatically pushed out from a nest in extreme situation.

In order to avoid a lighter exit out of operation do not hold him in the drowned situation violently.

The forward ashtray is located in the central part of the dashboard. For extraction press down the lever and pull the pallet an ashtray outside from the nest.
Forward ashtray.

Salon equipment

Sun-protection peaks

Peaks are located over a windscreen and serve for protection of eyes of the driver and the forward passenger against direct sunshine. At lateral lighting the peak can be as appropriate developed. From the interior of a peak there is a mirror. The mirror is covered with a cover at which podnimaniye illumination automatically joins. Intensity of illumination is regulated by a potentiometer of polzunkovy type at will of the user.
Polzunkovy regulator of intensity of illumination of the mirror located in a sun-protection peak.

Top console

The top console is located along the central part of a forward half of a ceiling upholstery of salon and is used for placement of some auxiliaries.

Lamp of illumination of salon

In front and behind in the top console the lamps intended for illumination of salon and a possibility of reading are built in. Each lamp consists of two lamps which lamps join automatically when opening any of car doors (including a back door). Possibility of turning on of lamps by a moving way a switch rychazhka in extreme right situation is provided also.

Lamps for reading join by a nazhimaniye on a concave surface of the corresponding lens. For switching off of a lamp press a lens repeatedly.
The forward lamp of the top console (back looks similarly).

Before leaving car salon, do not forget to switch off a lamp for reading.

Compartment for placement of a remote control (DU) by opening and closing of gate of garage

The compartment under installation of the DU panel is located in an average part of the top console. Activation of the panel is made by a nazhimaniye on a compartment cover. For cover opening firmly press its back region and pull down.
Compartment for DU panel placement by garage gate.

To establish the DU panel in a compartment of the top console remove a protective film from the sticky party of a loopy and hook clamp (it is delivered complete with the console) and attach the last to the DU panel.

Now measure thickness of the panel and calculate necessary thickness of adjusting plugs, proceeding from the following conditions: At thickness of the panel from 9.5 to 22 mm three plugs are required.
Thickness of the panel, mm

Number of plugs

9.5 ÷ 22.2

2

19.0 ÷ 32.0

1

32.0 ÷ 35

0

Adjusting plugs are fixed on the back party of a cover of a compartment - take demanded number of plugs and pull them on the provided directing. Insert the panel into a compartment and place it so that the OPEN button to (Open) it appeared is located on one axis with plugs.

Close a compartment cover, having tracked, that the clamp was latched. Now for operation of the panel will enough press a compartment cover.

Compartment for storage of sunglasses

The compartment is located in a back part of the console and equipped with a clamp for fastening of sunglasses in it. For cover opening firmly press its part designated by a special mark. The cover at a nazhimaniye should turn over slowly.

Device of reception of signals of the DU panel of the uniform lock

For operation of the uniform lock it is necessary to approach to the car with any of the parties, to direct a DU panel radiator approximately on the top console of the car and to press the management button. Activators should make respectively unlocking or locking of locks of doors.

Compass block / мини-процессора route data

The device is also located in the top console of the car and delivers to the driver information on temperature of external air, an arrangement of the countries of light and route characteristics.

Block of the compass/index of temperature

On the screen of the display of the device value of temperature of external air and the direction of movement of the car concerning light countries (one of eight) are highlighted.

Indications of the mini-processor of route data

The device is equipped with the display on which screen the following parameters are highlighted:

  • Size of the distance (ODO) passed on a route;
  • Average fuel consumption from the moment of the last reinstallation of the processor (AVG ECO);
  • Fuel consumption at the moment (ESO);
  • Settlement distance which the car can pass to a full devastation of a fuel tank (DTE).
  • Calculation is made proceeding from speedometer indications for the last some minutes;
  • Time of stay of the ignition key in the situation ON from the moment of the last reinstallation of the processor (ET).
Display and control panel of the mini-processor of route data.

On the control panel of the processor the button of step-by-step scrolling of all route parameters (STEP), plus of indications of the thermometer and a compass is provided.

By means of the US/M button switching of systems of measurement of indications of the processor (American/metric) is made.

For reinstallation of the processor press at the same time the US/M and STEP buttons and hold them pressed during at least two seconds. On the display the message confirming completion of reinstallation (RESET) should be highlighted.

Automatic calibration of a compass

The compass is equipped with the device of automatic calibration that allows to avoid need of performance of this task manually. At the beginning a compass CAL (Calibration) on the display screen can issue to operation of the new car the unstable indications, the messages which were accompanied by highlighting. After commission of three full turns (on 360 °) the car on free from large metal objects of the district the message of CAL should disappear from the screen, and compass readings to be stabilized.

If indications are unstable, but CAL message on the screen does not stand out, it is necessary to make manual calibration of a compass. Include ignition and switch the display in a mode of demonstration of parameters of the compass/thermometer. Within 10 seconds hold pressed the US/M and STEP buttons - on the screen CAL message should be highlighted. Release buttons and make on the car three full turns (on 360 °) on the free district from large metallsoderzhashchy objects. The message of CAL should disappear from the screen. Compass readings should be stabilized.

The deviation between the direction on magnetic and geographical poles is called as inducement. In some areas of the globe this deviation can reach rather big size in order that the compass gave false evidences. In this case it is necessary to make the corresponding adjustment.

Find a zone corresponding to the geographic location, on the card of magnetic inducement (see an accompanying illustration). Include ignition, having turned a key in the situation ON and switch the display in a mode of demonstration of parameters of the compass/thermometer. Within 5 seconds hold pressed the US/M and STEP buttons - on the screen the message VAR (Inducement) and number of the last brought in memory of the device of a geographical zone should be highlighted. By means of the US/M button change number on new, corresponding to the actual residence of the car. For entering of new data into memory of the processor and return of system to a mode of normal functioning press the SET button.
Card of magnetic inducement.

Electrodriving top hatch (additional complete set)

The probability of receiving serious traumas during failure considerably increases at ejection of the driver or the passenger via the open top hatch of the car! Watch that seat belts during movement were constantly clasped.

Do not allow to operate independently to children the electric drive of a cover of the top hatch! Be not put out at all in the hatch during car movement!


For wiping of glass of the top hatch use only soft rags not containing an abrasive.

The cover of the hatch can is lifted in any situation between completely closed and completely opened by conditions. The control panel is in the top mini-console of the car located closely to a windscreen. For opening of the hatch take away back the kulisny switch. The glass cover of the hatch should move in a cavity provided between the panel of a roof and a ceiling upholstery of salon. At the same time before a hatch aperture on a roof of the car the airreflector will rise. Closing of the hatch is made by a deviation a switch rychazhka forward (to a windscreen). Hold the switch before complete closing of the hatch.

Also ventilating provision of a cover of the hatch is provided - in a closed position of glass take away a rychazhok of the kulisny switch forward. Return of glass to a starting position is made by branch a rychazhka back.
The mini-console with the control panel the electric drive of the top hatch (an additional complete set).

Moving and zadviganiye of a sun-protection shtorka is made manually without use of any electromechanical drive. Existence of such shtorka allows to maintain more comfortable temperature in salon, especially in the winter in a sunny weather.
Ventilating position of the top hatch.

Illumination of salon

Internally illumination of salon is provided with the lamps established in the top console (see above subsection the Top console). Management of lamps is made for reading by a nazhimaniye on their lenses. Some models are in addition equipped with the lamps, built in panels of an internal upholstery of forward doors under armrests.

Illumination of a luggage compartment

Inclusion of a lamp of illumination of a luggage compartment is made when opening a door of a back, or other door of the car. Also compulsory turning on of the lamp by means of the polzunkovy switch is possible. When all doors of the car except a door of a back are closed, shutdown of all internal lamps can be made by a nazhimaniye way on a plafond of a lamp of illumination of a luggage compartment. The repeated nazhimaniye on a plafond renews lighting.
Lamp of illumination of a luggage compartment.

The switch of illumination of a luggage compartment enters into a working condition only on termination of functioning of system of illumination of salon in a landing time in the car.

Demountable cover of a luggage compartment

To close a luggage compartment grasp a cover in the location of the central handle. Delay a cover for the spare wheel located in a luggage compartment. Insert manual arms of a cover into grooves in panels of an internal upholstery of a door of a back. Existence of a cover does not disturb opening of a door of a back thanks to existence of the automatic returnable device.
The cover closing a luggage compartment of the car
(it is specified by an arrow).

Cargo grids of a luggage compartment

On the back lateral panel of an upholstery of a luggage compartment opposite to a spare wheel the pocket made of a grid in which if necessary there can be small subjects is fixed. The additional grid of a triangular form is equipped with the hooks located on corners which can be clung at will for eyes on a floor of a luggage compartment for the purpose of fastening of various subjects. The grid can be also fixed on a reverse side of a back of a back seat, or across a back doorway, forming the fenced closed space.
Grids for fastening and placement of subjects in a luggage compartment.