- To Poddomkratta the car also establish it on props.
- Take шплинт and give a nut of fastening of a spherical hairpin on an arm of a beam of a frame. Шплинт throw out. After a nut otdavaniye the spherical hairpin should drop out of an arm. If it does not occur, it is necessary to use a bifurcate divider of spherical hinges. For the purpose of minimization of risk of damage of a cover of the hinge previously grease the tool and a cover.
|
|
Details of fixture of a cross-section jet bar (lobby).
|
|
|
- If the spherical hairpin on the top end of a jet bar does not give in to extraction from the top arm of a frame, use a bifurcate divider of spherical hinges.
|
- Give a bolt with a nut of fastening of a jet bar to an arm on right (from the party of the passenger) the forward end of a case of the bridge and remove a bar.
|
|
- Give a bolt (shooter) with a nut (in a picture it is not visible) and separate the bottom end of a jet bar from a frame arm of a case of the bridge.
|
- Installation make upside-down. Fixture tighten with demanded effort.
|
|
