Jeep Grand Cherokee

1993-1999 of release

Repair and car operation



Jeep Grandee Cheroki
+ Jeep Grand Cherokee brand Cars
+ Settings and routine maintenance
+ Ryadny six-cylinder engine
+ V8 Engine
+ Procedures of the general and major maintenance of the engine
+ Systems of cooling, heating and air conditioning
+ the Power supply system and production of the fulfilled gases
+ System of electric equipment of the engine
+ Systems of decrease in toxicity of the fulfilled gases and engine management
+ Manual box of gear shifting
+ Automatic transmission
+ Transfer case
+ Coupling and transmission line
+ Brake system
- Suspension bracket and steering
   General information
   Removal and installation of the forward stabilizer of cross-section stability and its plugs
   Removal and installation of forward shock-absorbers
   Removal and installation of a cross-section jet bar of a forward suspension bracket
   Removal and installation of levers of a forward suspension bracket
   Removal and installation of screw springs of a forward suspension bracket
   Removal and installation of rotary fists
   Replacement of spherical hinges
   Removal and installation of a bar of the back stabilizer of cross-section stability
   Removal and installation of back shock-absorbers
   Removal and installation of a cross-section jet bar of a back suspension bracket
   Removal and installation of levers of a back suspension bracket
   Removal and installation of screw springs of a back suspension bracket
   Removal and installation of a steering wheel
   Condition check, removal and installation of a steering drive
   Removal and installation of the steering mechanism
   Removal and installation of the pump of system of hydrostrengthening of a wheel
   Pumping of system of hydrostrengthening of a wheel
   Wheels and tires - the general information
   Corners of installation of forward wheels - the general information
+ Body
+ System of onboard electric equipment
+ Governing bodies and operation receptions
0ea6cc78 0ea6cc78


Wheels and tires - the general information

All cars described in this Management are equipped the metric size radial, tires with a steel or fiber glass breker. Use of tires of other standard size can have negative impact on quality of driving and controllability of the car. Never establish on the car of the tire of various type as simultaneous use of the radial and diagonal surrounding is fraught to serious complications in driving. Originators of this Management recommend to make at the same time replacement of both wheels of one bridge. In case of replacement only one wheel, track compliance of a standard size, structure and drawing of a protector of a spare wheel to the remained.

Metric code of the size of the tire

As pressure in tires makes appreciable impact on controllability of the car and speed of wear of a protector, at least once a month, or before a long trip it is necessary to inspect pressure of a rating of tires (Head of Control and routine maintenance).

Replacement of disks should be made in case of their deformation (bends and dents), emergence of leakages of air, emergence of ovality of boltovy openings, strong corrosion and vertical asymmetry or impossibility of an adequate tightening of nuts of fastening of a wheel.

Correctness of balancing of wheels makes essential impact on controllability of the car and efficiency of its braking. Violation of balancing of wheels reduces controllability of the car and comfort of driving, and also reduces service life of tires. At replacement of tires it is necessary to carry out at once balancing of wheels (address in shinomontazhny workshops).