Jeep Grandee Cheroki
+ Jeep Grand Cherokee brand Cars
+ Settings and routine maintenance
+ Ryadny six-cylinder engine
+ V8 Engine
+ Procedures of the general and major maintenance of the engine
+ Systems of cooling, heating and air conditioning
+ the Power supply system and production of the fulfilled gases
+ System of electric equipment of the engine
+ Systems of decrease in toxicity of the fulfilled gases and engine management
+ Manual box of gear shifting
+ Automatic transmission
+ Transfer case
- Coupling and transmission line
General information
Coupling - the general description and check of serviceability of functioning
Removal and installation of components of hydraulic system of switching off of coupling
Removal, check of a condition and installation of components of coupling
Removal, check of a condition and installation of the vyzhimny bearing of coupling
Check of a condition and replacement of the directing bearing
Driveshafts, differentials and bridges - the general information
Check of a condition of the transmission line
Removal and installation of driveshafts
Replacement of kardanny hinges
Replacement of an epiploon of a shaft of a leading gear wheel of differential
Removal, service and installation of a nave and bearings (forward wheel)
Removal, major maintenance and installation of a forward power shaft
Removal and installation of assembly of the forward bridge
Removal and installation of a back semi-axis and bearing assembly
Removal and installation of assembly of the back bridge
+ Brake system
+ Suspension bracket and steering
+ Body
+ System of onboard electric equipment
+ Governing bodies and operation receptions
|
Check of a condition of the transmission line
|
|
- To Poddomkratta a car back also establish it on props.
- Be appropriated for the car and make visual survey of the driveshaft. In case of identification of cracks or deformations of the case of a shaft replace the last.
- Check forward and back parts of the driveshaft on existence of signs of leakages of oil. Traces of leaks around a shaft entrance in transmission or a transfer case tells about failure of the corresponding epiploon (see the description of procedure of replacement of an epiploon in Head Automatic transmission). Leaks since the end of a shaft turned to differential are signs of defect of an epiploon of a leading gear wheel of differential (The section Replacement of an epiploon of a shaft of a leading gear wheel of differential).
- Remaining under the car, ask the assistant to turn back wheels to force to rotate the driveshaft. Make sure of smoothness and noiselessness of functioning of kardanny hinges. Inadmissible existence люфта in hinges also is.
- Check of a condition of the kardanny hinge can be made and at a motionless shaft., having undertaken for Ouse from its both parties and having tried повращать its half from each other. Existence of any appreciable люфта speaks about wear of the hinge. Люфт in hinges it is possible to reveal also raising a shaft.
- In summary check reliability of a tightening of fixing bolts on the driveshaft ends.
- On 4WD models listed above check it is necessary to repeat and for the forward driveshaft. Besides, check a shaft on existence of signs of leakages of the sliding holder of the crosspiece, speaking about failure of a sealing cuff of the holder.
- Check driveshafts on existence of traces of leaks around an entrance them in a transfer case and differentials. Identification of those speaks about wear of the corresponding epiploons.
- Also check on leaks the external ends of sleeves of bridges, near boards of brake mechanisms. Existence of traces of leaks can be the certificate of failure of epiploons of semi-axes of the bridge.
|
|
|
|
