Jeep Grandee Cheroki + Jeep Grand Cherokee brand Cars + Settings and routine maintenance + Ryadny six-cylinder engine + V8 Engine + Procedures of the general and major maintenance of the engine + Systems of cooling, heating and air conditioning + the Power supply system and production of the fulfilled gases + System of electric equipment of the engine + Systems of decrease in toxicity of the fulfilled gases and engine management + Manual box of gear shifting + Automatic transmission + Transfer case - Coupling and transmission line General information Coupling - the general description and check of serviceability of functioning Removal and installation of components of hydraulic system of switching off of coupling Removal, check of a condition and installation of components of coupling Removal, check of a condition and installation of the vyzhimny bearing of coupling Check of a condition and replacement of the directing bearing Driveshafts, differentials and bridges - the general information Check of a condition of the transmission line Removal and installation of driveshafts Replacement of kardanny hinges Replacement of an epiploon of a shaft of a leading gear wheel of differential Removal, service and installation of a nave and bearings (forward wheel) Removal, major maintenance and installation of a forward power shaft Removal and installation of assembly of the forward bridge Removal and installation of a back semi-axis and bearing assembly Removal and installation of assembly of the back bridge + Brake system + Suspension bracket and steering + Body + System of onboard electric equipment + Governing bodies and operation receptions
|
Removal and installation of assembly of the back bridge
|
- Weaken nuts of fastening of back wheels, поддомкратьте the car and establish it on props. Remove wheels.
- Prop up assembly of the back bridge by the telezhechny jack got under differential.
- Give the bottom nuts of fastening of shock-absorbers, compress shock-absorbers, having cleaned them from a way (Head the Suspension bracket and a steering).
- Disconnect the driveshaft from the holder of a crosspiece of a shaft of a leading gear wheel of differential and suspend its back part to the car bottom by means of a piece of a wire (The section Check of a condition of the transmission line).
- To Otboltita a bar of the stabilizer of cross-section stability from a connecting link of the stabilizer (if are provided).
- Disconnect cables of the parking brake from the equalizer (Head Brake system). Disconnect a rod of management of the proportsioniruyushchy valve of the sensor of height from a bridge case (only for the Comanche models).
- Disconnect a flexible brake hose from a tee on a case of the back bridge. To Zakuporta the end of a hose or wind it with a plastic bag for the purpose of prevention of losses of liquid and hit in dirt system.
- Fix screw springs safety chains in order to avoid a sletaniye of springs after bridge lowering.
- Lower a jack and take bridge assembly from under the car.
- Installation make upside-down. Take care of that nuts of U-shaped bolts and bolts of collars of the kardanny hinge were tightened with demanded effort.
|
|
|
|