Jeep Grand Cherokee

1993-1999 of release

Repair and car operation



Jeep Grandee Cheroki
- Jeep Grand Cherokee brand cars
   + Identification numbers of the car
   Acquisition of spare parts
   + Equipment of service, tool and workplace equipment
   + Poddomkrachivaniye and towage
   Engine start from the auxiliary power supply
   - Automobile himikaliya, oils and greasings
      Cleaners
      Greasing liquids
      Hermetics
      Himikaly
      The other
   + Diagnostics of malfunctions
+ Settings and routine maintenance
+ Ryadny six-cylinder engine
+ V8 Engine
+ Procedures of the general and major maintenance of the engine
+ Systems of cooling, heating and air conditioning
+ the Power supply system and production of the fulfilled gases
+ System of electric equipment of the engine
+ Systems of decrease in toxicity of the fulfilled gases and engine management
+ Manual box of gear shifting
+ Automatic transmission
+ Transfer case
+ Coupling and transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ System of onboard electric equipment
+ Governing bodies and operation receptions
0ea6cc78 0ea6cc78



Greasing liquids

Impellent oils represent specially developed structures for greasing of internal components of the engine. Usually contain wide different range of the additives serving for prevention of foaming and corrosion. Impellent oils are issued various degree of viscosity - from 5 to 80. Need of application of oil of this or that grade usually is defined by climatic conditions and requirements of the concrete engine. Liquid (light) oils are usually applied in the conditions of a frigid climate and at insignificant loads of the engine. Heavy (viscous) oils are used in hot conditions and at strong loads of the engine. All-weather oils possess characteristics both easy, and heavy oils and usually have designations from 5W-20 to 20W-50.

Transmission oil is developed for application in differentials, RT, and other knots where stability to influence of high temperatures is required.

Greasing for components of the chassis and bearings of wheels represents the dense greasing applied in knots, subject to the raised loadings and a friction, such as bearings of wheels, spherical support of a suspension bracket, tips of steering drafts and kardanny hinges.

High-temperature greasing for bearings of wheels is capable to resist to influence of the high temperatures arising in bearings of wheels of cars, equipped with disk brake mechanisms. Usually contains the disulfide of molybdenum being greasing substance of dry type.

White greasing (tsiaty) represents the dense greasing put on contacting metal surfaces in places where there are problems with the increased moistening. Remains soft both at low, and at high temperatures, it is not washed away and it is not diluted by water.

Assembly greasing represents special greasing, for application in the conditions of high pressures, usually contains molybdenum and is used for greasing of the knots subject to high loadings (such as radical and shatunny bearings and working ledges of cams) before the first start of the engine after completion of major maintenance.

Silicone greasings are applied to protection of rubber, plastic, vinyl and nylon components.

Graphite greasings serve applications where oil cannot be used in a type of problems with pollution (for example in locks). Dry graphite perfectly greases metal details, preventing impact on them of pollution, moisture and acids. Greasing is electrowire and does not break contact in such knots, such as the ignition lock.

Getting structures are applied by Molibdensoderzhashchiye to simplification of an otdavaniye of the "become attached" fixture, and also for fixture greasing in order to avoid its corrosion in the future.

Heatwire greasing is not electrowire and serves for installation of electronic modules of ignition from which intensive heat removal is required.