|
|
Jeep Grand Cherokee1993-1999 of releaseRepair and car operation |
|
|
Jeep Grandee Cheroki - Jeep Grand Cherokee brand cars + Identification numbers of the car Acquisition of spare parts - Equipment of service, tool and workplace equipment Equipment of service Fixture Sizes of fixture Procedure and order of a tightening of carving connections Dismantling of components Prokladochnye of a surface Councils on removal of hoses Tool Workplace equipment + Poddomkrachivaniye and towage Engine start from the auxiliary power supply + Automobile himikaliya, oils and greasings + Diagnostics of malfunctions + Settings and routine maintenance + Ryadny six-cylinder engine + V8 Engine + Procedures of the general and major maintenance of the engine + Systems of cooling, heating and air conditioning + the Power supply system and production of the fulfilled gases + System of electric equipment of the engine + Systems of decrease in toxicity of the fulfilled gases and engine management + Manual box of gear shifting + Automatic transmission + Transfer case + Coupling and transmission line + Brake system + Suspension bracket and steering + Body + System of onboard electric equipment + Governing bodies and operation receptions 
|
Tool The choice of the good tool is one of the main requirements for everyone who plans independent performance of procedures of maintenance or car repairs. At first sight the expenses connected with acquisition of the demanded set of tools, can seem too big, however at their sravnivaniye with the expenses interfaced to performance of procedures of routine maintenance and the elementary car repairs at car repair shop, will appear quite reasonable. To help the average motorist with a choice of the tool necessary at carrying out various procedures on the care of the car, described in this Management, the lists of three tool kits which have been conditionally entitled as below are provided: a tool kit for routine maintenance and the minimum repair; a tool kit for the general and major maintenance and the special tool. The owners of cars who do not have practical experience of carrying out mechanical works, should begin with performance of the procedures limited to use of tools from the first list, increasing thus the qualification and gradually expanding a range of the applied tool. In process of acquisition of experience it is possible to pass to performance of more complex challenges, supplementing a tool kit available on hands. After a while the received skills will allow to start performance of more difficult works demanding use of the tool from the second list (for the general and major maintenance of the car). When your qualification will start to allow to save considerable means on independent performance of difficult repair procedures, it is possible to think of acquisition of the special tool from a special set.
Tool kit on routine maintenance and the minimum car repairs The list provided below includes a minimum of procedures of routine maintenance necessary for performance and insignificant car repairs of tools. Acquisition of a set of the combined wrenches (with a usual rozhkovy head on one end is recommended and with cap on other), despite big cost of such set in comparison with cost of a set of usual rozhkovy keys, expenses will be justified, since these keys possess advantages of both types.
Tool kit for the general and major maintenance of the car This tool is necessary at carrying out any operations on repair of the engine of the car and it is offered in addition to the first list. This list includes a complete set of replaceable face heads. At considerable cost, the set of replaceable heads brings invaluable advantage, thanks to the universality and convenience in the address, - in particular in a combination with entering into a set of various type drives. Of 1/2 inches are recommended to use preferably drives section (instead of 3/8 inches) since they, though are more expensive, can be used practically with any type of dinamometrichesky keys (in an ideal, the good mechanic should have at the order both such as drives). Cheaper alternative to a set of replaceable face heads is the set of tubular keys.
Special tool The tools being adequately expensive, not required regularly, or demanding at using of implementation of instructions of manufacturers get to this list. If the sphere of your activity does not include frequent performance of difficult mechanical operations, acquisition of such tool will be a bad investment of means. It is reasonable to get it by sharing the cost with friends or to hire in car-care center workshops. Only those tools which can be found in retail trade or which are issued for distribution on representation offices of firms are brought in the list. Sometimes in the Management text you will find references to such special tools. Usually authors try to offer in parallel the alternative method, allowing to avoid obligatory use of the remote tool. In case to avoid use of the special tool it is impossible, and its acquisition in using is problematic, performance of the corresponding works is better for entrusting specialists of car-care center.
Tool acquisition To the beginner mechanic in respect of acquisition of the necessary tool for performance of procedures of routine maintenance and car repairs can be offered some practical advice. By preparation for carrying out procedures of routine maintenance or the minimum car repairs it is reasonable to get the tool separately. On the other hand, in case of planning of wide works, it is simpler and more reliable to buy a set of the modern tool in shop of retail network. Set acquisition usually manages slightly cheaper than individual purchases and is often supplemented with the enclosed tool box. Further, for choice expansion, separate tools, additional sets and a tool box of the bigger size can be bought in addition. Gradual expansion of a set of tools will allow to stretch expenses and to be defined in a choice of really necessary tools. Specialized tool shops are the unique source of acquisition of some special tools, but, irrespective of a source, avoid cheap purchases, in particular at a choice of screw-drivers and replaceable face heads as term of their service for certain will appear short. Expenses connected with replacement and restoration of the cheap tool as a result will appear incomparably more considerable, than costs of single acquisition of the qualitative goods. Care of the tool and its storage The good tool is a valuable investment of means, therefore it is reasonable to take care of keeping it clean and constant availability for service. After using the tool before combining it in a storage place, always carefully wipe its surface pure dry rags, deleting from it traces of dirt, greasing and the remains of metal particles. Never leave the tool scattered on a workplace. After completion of works attentively check space under a cowl and under the car on existence of the forgotten tool. For storage of such tool as screw-drivers, flat-nose pliers, hammers the tool comb fixed in a convenient place on a wall of garage, etc. is ideally suited. Sets of wrenches and replaceable face heads should be stored in metal boxes. The measuring tool should be stored in inaccessible to impact of corrosion, dry and pure places. Always it is necessary to pay attention to a condition of working surfaces of the tool. The shock part quickly a hammer in the course of work is subject to a rasklepyvaniye, screw-drivers lose over time sharpening of the stings. Do not stint to give a little time and attention to that by means of an emery paper or a file to remove расклепы and to put in order cutting edges. It is irreversible the worn-out or damaged tool replace. At careful leaving the tool will serve to you belief and the truth during very long term. |
|