Jeep Grand Cherokee

1993-1999 of release

Repair and car operation


Jeep Grandee Cheroki
- Jeep Grand Cherokee brand cars
   + Identification numbers of the car
   Acquisition of spare parts
   + Equipment of service, tool and workplace equipment
   + Poddomkrachivaniye and towage
   Engine start from the auxiliary power supply
   + Automobile himikaliya, oils and greasings
   - Diagnostics of malfunctions
      Engine
      Engine electric equipment
      Power supply system
      Cooling system
      Coupling
      Manual box of gear shifting (RKPP)
      Automatic transmission (AT)
      Transfer case
      Driveshaft
      Bridges
      Brake system
      Suspension bracket and steering
+ Settings and routine maintenance
+ Ryadny six-cylinder engine
+ V8 Engine
+ Procedures of the general and major maintenance of the engine
+ Systems of cooling, heating and air conditioning
+ the Power supply system and production of the fulfilled gases
+ System of electric equipment of the engine
+ Systems of decrease in toxicity of the fulfilled gases and engine management
+ Manual box of gear shifting
+ Automatic transmission
+ Transfer case
+ Coupling and transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ System of onboard electric equipment
+ Governing bodies and operation receptions

0ea6cc78 0ea6cc78

Suspension bracket and steering

The car withdraws at movement in one of the parties

  1. Tires (Head of Control and routine maintenance) are pumped non-uniformly up.
  2. Defect of tires (Head of Control and routine maintenance) takes place.
  3. Suspension bracket or steering components (Head of Control and routine maintenance) are excessively worn-out.
  4. Carrying out adjustment of corners of installation of forward wheels is required.
  5. Forward brake mechanisms (Head Brake system) are taken.

Breakthroughs, derganye or vibrations take place

  1. Balancing of wheels is broken or there was their ovality. Make balancing in a shinomontazhny workshop.
  2. Bearings of back wheels are worn-out, weakened effort of their tightening or adjustment (Head of Control and routine maintenance) is broken.
  3. Shock-absorbers or other components of a suspension bracket (Head the Suspension bracket and a steering) are worn-out or damaged.

Excessive rocking of the car or "zaryvaniye" his nose on turns takes place or when braking

  1. Shock-absorbers are faulty. Replace all set (Head the Suspension bracket and a steering).
  2. Springs and/or other components of a suspension bracket are broken or weakened. Make check of a condition of components (Head the Suspension bracket and a steering).

Too hardly the steering wheel rotates

  1. Excessively liquid level fell in the tank of system of hydrostrengthening of a wheel (Head of Control and routine maintenance).
  2. Tires (Head of Control and routine maintenance) are pumped incorrectly up.
  3. Hinges of a steering drive (Head of Control and routine maintenance) are insufficiently greased.
  4. Adjustment of corners of installation of forward wheels is broken.
  5. The hydraulic booster does not develop the demanded capacity (see. The section the System of hydrostrengthening of a wheel does not develop due effort).

Takes place excessive люфт a steering

  1. Weakened effort of a tightening of bearings of forward wheels (Head of Control both routine maintenance and the Suspension bracket and a steering).
  2. Excessively from ношены suspension bracket or steering components (Head the Suspension bracket and a steering).
  3. Adjustment of a steering transmission (Head the Suspension bracket and a steering) is broken.

The system of hydrostrengthening of a wheel does not develop due effort

  1. The driving belt of the pump of the hydraulic booster is worn-out or damaged or adjustment of his tension (Head of Control and routine maintenance) is broken.
  2. Excessively level of hydraulic liquid (Head of Control and routine maintenance) fell.
  3. Passableness of hoses or lines of hydraulic system is broken. Check, in case of need make replacements.
  4. Air got to hydraulic system. Pump over system (Head the Suspension bracket and a steering).

Excessive wear of protectors (not in one any area) takes place

  1. Tires (Head of Control and routine maintenance) are pumped incorrectly up.
  2. Balancing of wheels is broken. Address in a shinomontazhny workshop
  3. Disks of wheels are damaged. Check, in case of need make replacement.
  4. Suspension bracket or steering components (Head the Suspension bracket and a steering) are excessively worn-out.

Excessive wear of protectors on external edge takes place

  1. Tires (Head of Control and routine maintenance) are pumped incorrectly up.
  2. Turns are too sharply made. Reduce speed.
  3. Adjustment of corners of installation of forward wheels (excessive convergence) is broken. Address in a workshop for carrying out professional adjustment.
  4. Will bend or is braided the suspension bracket lever (Head the Suspension bracket and a steering).

Excessive wear of protectors on internal edge takes place

  1. Tires (Head of Control and routine maintenance) are pumped incorrectly up.
  2. Adjustment of corners of installation of forward wheels (divergence) is broken. Make adjustment in a car-care center workshop.
  3. Components of a steering are damaged or weakened their fastening (Head the Suspension bracket and a steering).

Local wear of a protector takes place

  1. Balancing of wheels is broken.
  2. Are damaged or погнуты disks. Check, in case of need make replacement.
  3. Defect of tires (Head of Control and routine maintenance) takes place.